Low-VOC PRE® Paint Prep is the perfect way to remove silicone, wax, polish, grease and dirt...just spray or wipe on, wipe off! Single most effective remover for dirt, wax, polish, grease and much more! Helps promote paint adhesion! Choose aerosol or by quart. Easy application and removal. It’s the final step in auto body paint prep and metal prep. Perfect for cleaning parts prior to powder coating. For use in any area or state that requires Low VOC cleaners.

Warranty

MADE IN THE USA 90 WARRANTY NSN# NA

12 OZ NET WEIGHT

Accessories

Eastwood Low VOC Silicone Wax Dirt Remover Pre Paint Aerosol 12 oz

Application Tips

PRE Painting Prep removes grease, oil, wax, and polish. PRE Painting Prep is a blend of solvents that may attack plastic, so test first. One can treats 10 sq ft. On waxed areas, or surfaces that may have silicones, more than one cleaning may be necessary. Works better than lacquer thinner, which can leave a film behind that can compromise paint adhesion. Use to prep for all Eastwood paints, including our exhaust manifold paints. Use in a well ventilated area, or wear a respirator .

Safety Information

ALWAYS USE EYE, SKIN, AND RESPRIATORY PROTECTION USE IN A WELL VENTILATED AREA.

Customer Reviews

Rated 5 out of 5 by Jeff from Prepainting prep I used this spray to clean the spray hose that came with the internal frame spray. Cleaned the hose really well and cleaned up overspray that was still wet

Date published: 2021-10-04

Rated 5 out of 5 by Bud2 from Eastwood pre paint prep saves time! Worked just fine for prepping small items on my model T project

Date published: 2021-09-15

Rated 5 out of 5 by W30ROCKER from Also help to show inperfection when wet Work with this product all the time Awesome product

Date published: 2021-08-21

Low VOC Pre Paint Prep Aerosol 12 oz Reviews - page 2

Questions & Answers

What is the best type of cloth to use with this product so as to not leave any fibers prior to powder coating?

Asked by: Carlos

A microfiber towel would be one of the best to use without leaving any fibers.

Answered by: SeanW

Date published: 2021-08-15

Will this harm paint if applying to painted surface? I need to pull dents with painless dent removal kit

Asked by: matthew

If your paint is catalyzed this will not harm it at all.

Answered by: SeanW

Date published: 2021-04-05

How soon can paint be applied after cleaning with Pre Paint Prep? This question was asked previously, but the answer did not answer the question. Basically, can you paint on it immediately or should I wait a period of time, say minutes , an hour.....?

Asked by: Mike

Since this is a solvent-based product there are a few factors but it normally gasses off after a few minutes.

Answered by: ZachC

Date published: 2021-02-23

wanting to know if this product can be used in COLD temps, below freezing to sub-zero, to clean hidden salt out of frame cavity (instead of using water to rinse out powder salt) I also have half completed EW IFC inside, will it have a bad reaction?

Asked by: J A Y

We would recommend Eastwood's Road Salt Neutralizer(51507ZP) to clean and remove salt from the frame of your vehicle. This product will not harm your painted or finishes surfaces. Go to www.eastwood.com and type in 51507ZP on the search bar and you can read the specifications.

Answered by: vince

Date published: 2021-02-08

Would you recommend using this before I paint an aluminum intake manifold with your Almost Chrome paint ?

Asked by: Jasper 59

Yes, this would be the best cleaning agent we offer prior to applying any of our paints or coatings in general.

Answered by: Kelly H

Date published: 2020-09-13

Can I use this prep on an existing acrylic urethane fully-cured clear coat prior to applying another couple coats of acrylic urethane clear? I guess what I really need to know is can I use this product on all fully cured paint systems? not just bare metal

Asked by: Uncle Freddy

Apply to the cloth you are wiping down and give the paint a light wipe down. As long as the finish is a cured 2K finish, it will be fine to give a quick wipe down.

Answered by: NickC

Date published: 2020-06-10

Thinking of using to clean floor boards, prior to using self stick dampening material. Will adhesion be good 

Asked by: JULES

Our Pre painting prep is perfect for getting areas clean of residues that would affect the adhesion of self stick materials.

Answered by: Scott C

Date published: 2020-06-10

Is this what should be used before coating plastic trim pieces with Eastwood Black Resurfacer?

Asked by: Michael

You can use a standard dish soap and water. I would not recommend using a solvent based product such as this cleaner on plastics.

Answered by: Kelly H

Date published: 2020-05-14

Low VOC Pre Paint Prep Aerosol 12 oz Questions - page 2

Low VOC Pre Paint Prep Aerosol 12 oz

Reg. $12.99 Sale $11.97 Save $1.02

In Stock