Item #
15357Z
BRAND: Eastwood
Eastwood Metal Blackening System
The look of OEM applied black oxide coating at home, and even more durable
The look of OEM applied black oxide coating at home, and even more durable
Eastwood 4:1 High Solids Urethane Premium Show Clear - 128oz is rated
out of
5 by
11.
The look of OEM applied black oxide coating at home, and even more durable
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
The look of OEM applied black oxide coating at home, and even more durable.
- Replicates OEM black oxide/phosphate finish
- Chip and chemical resistant
- Resists temperatures up to 600° F
- Protects against rust and corrosion
- Not affected by DOT 3 brake fluid or gasoline
- No special equipment, no heat cure
- For iron, steel, stainless, and aluminum
Many factory brackets and fasteners originally were given a black oxide/phosphate finish to protect them. Eastwood’s Metal Blackening System allows you to apply a factory looking finish, with no special equipment and no need to heat cure. This 2 component product protects against rust and temperatures up to 600° F. It not only replicates the look of black oxide, but the feel as well, while being even more durable.
Warranty
In the Box
Contents
Guides & Accessories
Instructions
Click here to download product Material Safety Data Sheet.
Safety Information
Application Tips
Application is either with the included aerosol spray or conventional paint gun or air brush. Once product is dry to the touch, approx 24 hours, parts can be assembled or placed back into service. Once parts have fully cured for 2 weeks, they will be protected from corrosion, chemicals and abrasion for years and still have that OE black oxide appearance.
Reviews
Rated 4 out of
5
by
Jay E from
Very good product
I was pretty skeptical about this product based on mixed reviews. I used this to coat two bare metal power steering master cylinder. I wanted this product because it says it will be DOT3 fluid resistant. While it remains to be seen if it can really handle that, everything else was pretty much top notch except the price. I mixed it in 2 halves, and coated the two master cylinders and about 2 dozen body bolts with the first half. I wish the hardener and base material had gradations so I could more accurately measure the mix’s, but i got it right anyway and it dried overnight to a very hard flat black that looks very even. I also cleaned up the firewall where fluid had removed some paint and repainted with some of this - this also looked really well. I cleaned the sprayer with thinner as recommend and with the second half of the product on another day I sprayed other areas that I had cleaned up on the underside of the car- this was an excellent hard finish when complete. I covered about 3-4ish square feet of surface with it. I didn’t like that the sprayer will leak if tilted too much or shaken, so that was kind of unhandy. Otherwise - I am thrilled with the results thus far. If it can really survive DOT3 fluid I will say generally very impressed, but given the high cost for low volume of product I can’t give it a full 5 stars. High 4 stars is best I can do.
Date published: 2021-04-04
Rated 2 out of
5
by
nick from
questions
is it a polymer coating? seems very similar to cerakote ...
Date published: 2020-04-26
Rated 1 out of
5
by
Tony from
Horrible Product…
This is the worst product I have ever purchased from Eastwood…
I was very excited to use this product for my motorcycle’s hardware…
I followed the instructions but the results were just terrible..
Date published: 2022-03-18
Rated 1 out of
5
by
froggy from
poor product
Tried to use on steel and aluminum, did not like the aluminum. The sprayer is garbage, did not work. Used Por 15 on other work and it did well. I would not recommend this product.
Date published: 2020-06-08
Questions & Answers
can this product be used on raw steel? If so does the raw steel have to be roughed up or polished?
Yes this can be applied directly to steel. The steel must be thoroughly cleaned then scuffed. At that point your ready to apply the Product.
Date published: 2019-04-18
Will this cover silicon bronze? I want to blacken the steel without staining the silicon bronze braze bead. Is this possible?
Yes this can be applied to Silicon bronze.
Date published: 2019-04-06
Can the 'Blackening' be clear topcoated for greater wear resistance and if so what do you recomend? Thanks
Yes, this Blackening System can be top coated with either our Diamond clear (or for best protection) our 2K clears. Please keep in mind both clear options are only temp rated up to 250F-300F whereas this Black paint system is up to 600F.
Date published: 2021-07-10
Can this be used as a primer under your 2K paint.
This product should not be used as a primer for under the 2k paint.
Date published: 2018-12-05
How and what do you clean the equipment with after use.
Lacquer thinner and or our aerosol injected cleaner:https://www.eastwood.com/aerosol-injected-cleaner-11-oz-net.html should be used for cleaning this preval sprayer out.
Date published: 2018-11-11
Can electricity be conducted through your product or does it act as an insulator?
This product would work as an insulator.
Date published: 2020-06-10
I am considering this product for a low temperature heat sink (LED taillight on a motorcycle). What is a typical cured thickness of the coating?
Our Metal blackening can be sprayed from 0.25 to 1.5 mil.
Date published: 2018-10-23
Can the components be proportionally mixed if I do not have enough parts to use it all in one session?
Yes, this can be mixed at whatever increment you like. It needs to be mixed in a 12:1 ratio.
Date published: 2018-10-08
I'm looking to apply this over raw steel on a custom display stand for a piece of glass sculpture. The specs call for a blackening agent which I assume is your product followed by a hand rubbed dull wax overcoat. Can I apply a wax over your product
This is a paint on product to replicate black oxide, if you wax this product i will change the appearance of the product.
Date published: 2018-10-01
I have three black stainless appliances and a bright stainless stove will it work on the stove? thanks
Unfortunately we cannot recommend using any of our paints on a stove in which food would ever be prepared.
Date published: 2018-08-10
I’m trying to paint over the chome on my side view mirrors, will this product be a good choice to use if I’m not looking to replace my entire side view mirror?
Yes that will work very well. Just clean and scuff the chrome before you apply this product.
Date published: 2018-07-25
Do you recommend a primer with this product, or does it adhere to bare metal?
Our Metal blackening kit will adhere to properly prepped and cleaned bare metal.
Date published: 2018-05-10
Once you mix the two part system, must you use the whole kit right away, or can it be stored mixed?
Once you mix the two part system it will need to be used before it hardens. If you have all your parts ready to go you will have plenty of time to put your desired number of coats on.
Date published: 2018-09-16
I have factory painted white steel or iron I assume is baked enamel. Does the paint need to be fully removed before applying this product or can it be etched? I also have other non-painted hardware including zinc coated & stainless. Are these ok to treat?
You can simply scuff the existing paint prior to application of this product. Stainless and zinc hardware is perfectly fine to use as well.
Date published: 2018-09-16
Hi, I wanted to ask you if this product might work to paint golf clubs, I am trying to restore a putter and also some a few wedges, thanks!
While we have never tested our paints on golf clubs I would say this is probably going to be the best bet of what we have since it is a durable 2 part catalyzed paint.
Date published: 2018-09-16
Will this hold up on a knife blade? I know the edge will be silver and that is fine.
Since we have never tested our products on knives all we can say is when applied to a properly prepped metal it is a very durable catalyzed product.
Date published: 2018-09-16
Hi, How safe is this after it's dry? Forexample, if it was to be used for blackening an outdoor knife which was also used for cutting food, vegetables, salami and so on.
none of our products are FDA approved.
Date published: 2020-09-26
Is this product durable enough to be used for brass or silver jewelry (rings) without it wearing off?
This product has never been tested for long term durability on any jewelry. It has also not been tested for constant exposure to skin.
Date published: 2020-09-26
Looking to refinish my Scotty cameron 303 stainless steel putter. Like the look of the black on my style of putter. Will you product hold up to 18 hole?
I applied it to a scotty Cameron Newport 2.0 303 stainless I end up doing the head and shaft. Came out really well. also did a second scotty I bought that one came out well. But end up with a chip in the coating from the concrete when adding the grip. So duribility wise might not be as good as I hoped. Will have to watch club hitting it and put the head cover on.
Date published: 2018-09-16
How do you mix the solution
This can be mixed in the glass jar that is included in the kit.
Date published: 2017-08-18
Hi, I wonder if the product can be used in brass, and if it causes allergy with the skin. Thank you
This product can certainly be used on brass and should be kept off skin by wearing gloves.
Date published: 2019-01-01
How well does this work on metals like titanium? I been looking for a blacking solution that doesn't rub off and durable, an example would be if this was applied to a titanium ring.
When applied to properly prepped and scuffed titanium it will adhere very well and be durable as it is a catalyzed product.
Date published: 2017-07-10
Hi. What is the coverage of one kit? Could you coat a motor cycle engine and gear box with one kit? Sorry two questions. Thanks
This kit will cover about 6 sq ft. You will have to use this to figure out how much on your job one kit will cover.
Date published: 2016-05-09
Will this product Metal Blackening System from Eastwood work on stainless steel like 17-4?
This kit will work with iron, steel, stainless, and aluminum.
Date published: 2018-03-07
Will this product work on chrome plastic motorcycle parts?
This will work on plastic motorcycle parts. Just properly prep the surface and you are good to go.
Date published: 2016-04-07
Will this work on brass fixtures such as door or window hardware? I'm restoring a circa 1920 home. Most hardware is iron or steel with the occasional brass part that is non removable. If not what product do you recommend. Thank you.
As long as you prep the items correctly yes it can be used on those metals
Date published: 2015-07-08
Can this product be applied over chrome? If not, what if the chrome is lightly bead blasted to provide better surface adhesion?
You will need to abrade the surface for the product to stick to the chrome
Date published: 2018-04-08
Are the 2-part components available separately as individual refill items?
At this time unfortunately we do not sell them as individuals
Date published: 2015-01-20
what is the pot life of mixed components?
Pot life is 6-8 hours depending on ambient temperature.
Date published: 2015-01-16
How thick are the spray coatings?
.25-1.5 mils thick
Date published: 2015-01-08
We found other products you might like!
Eastwood Metal Blackening System
$108.99
In Stock