- Eastwood MIG 250 Welder
Eastwood MIG 250 Welder
Eastwood MIG 250 Welder
Item #20279 Brand: Eastwood
MIG Welding from EastwoodThe MIG 250 Welder is a powerful, lightweight machine at a DIY-friendly price. Eastwood designed this 250-amp MIG welder from the ground up to be powerful, easy to use and inexpensive. With its state-of-the-art inverter technology, it weighs half as much as similar welders - and costs half as much too. But it still delivers all the power you will ever need to weld steel from 20 gauge to ½-inch thick. If you add on an optional spool gun, you can also weld aluminum from 14 gauge to ¼-inch thick. The welder has 60 percent duty cycle at its full 250-amp setting, meaning you can weld for up to six minutes before giving the machine four minutes too cool.
The Eastwood MIG 250 Features:
- Welds 20 gauge steel up to ½-inch thick plate
- 120- or 240-volt powered
- Infinitely adjustable 30-250 amp welding range
- 60 percent duty cycle at 250 amp setting
- Weighs just 66 lbs.
- Torch Cable Length: 10 feet
- Ground Cable Length: 10 feet
- State of the art inverter technology
- Uses 4-inch or 8-inch wire spool
- Optional spool gun for aluminum wire
- Trafimet ERGOPLUS24 10-foot torch
- 3-year manufacturer's warranty
Portability from Your Eastwood Welder
This 250-amp MIG welder is the only truly portable unit on the market today. It has the ability to run on 120v or 240v, so you can plug it into pretty much any existing circuitry your shop has. This also means you can easily take it to the race track or job site and run it off a generator. On 120v power, you can use up to 140 amps, which is enough for most small and midsize jobs. The efficiency of the inverter means you'll still get great welds even on lower voltages or amp settings. It also can take both 4-inch and 8-inch diameter spools and feed steel or stainless steel wire from 0.023-inch to 0.045-inch. Flux core wire for outdoor welding can be between 0.030 and 0.045 inches in diameter while aluminum wire is limited to 0.030-0.035 inches. A unique wire spool mount is configured to hold either 2-pound or 10-pound spools of wire.
Everything You Need for MIG Welding
This lightweight unit ships to your door via FedEx or UPS, eliminating costly truck shipping freight fees. It comes with a Trafimet ERGOPLUS24 10-foot MIG torch and ground clamp, a shielding gas regulator and hose, extra contact tips, an 8-inch wire spool adapter, a roll of 0.030-inch steel MIG wire and other MIG 250 welding supplies for your shop. The only thing you need to add is a canister of shielding gas. It is the perfect way to do heavy-duty welding using the simple but effective MIG technique.
The MIG 250 has infinite adjustability of both its voltage and wire feed speed settings. Simply turn the two red dials on the front of the unit to set them at exactly the right levels for a perfect weld every time.
Precision Drive Motor
The drive roll mechanism, which is the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire
(1) MIG 250 Welder
(1) Trafimet ERGOPLUS24 10 foot torch
(1) Ground Cable with Clamp
(1) Shielding Gas Regulator
(1) Shielding Gas Hose
(1) Extra Contact Tips (2) .030"
(1) 8" Wire Spool Adapter
(1) Steel MIG Wire, ER70S-6, 2lb., 0.030"
(1) 120/240 VAC Adapter Cord
(1) Drive Roller
(1) Instruction Manual
Can use standard 120VAC, 20 amp 50 or 60Hz power.
Welds up to 140 amps on 120VAC.
The mig 250 will also use standard 240VAC, single phase 50 or 60Hz power.
Unit will weld up to 250 amps with 240 VAC input.
Use a NEMA 6-50 receptacle and a 50 amp dedicated line for this machine.
This welder fits on the Eastwood multi unit welding cart (11616).
Always follow manufacturer's instructions for proper safety requirements when performing welding tasks.
3 year warranty against manufacturing defects
20319 MIG250 Drive Roller 0.6/0.8
20325 MIG250 Drive Roller 0.9/1.2
20571 MIG250 Ground cable with clamp
20572 MIG250 Torch nozzle
20573 MIG250 Gas diffuser
21324 MIG250 Torch Liner
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
Customers also viewed:
Spool Gun with Metal plugOnly $230.99
Put your welder on top, plasma cutter on the bottom, tools in the middleOnly $106.99
60 Amps output cuts up to 7/8" 220v input
Radnor MIG Wire Spool 0.045 InchOnly $47.99
6 axial pull locking pliers for clamping different types of joints
Radnor MIG Wire Spool 0.035 InchOnly $46.99