close
Find Anything, Fast!

Need Support or Have a Question?

Click Here
  • Home
  • Eastwood MIG Stud Welding Kit
Eastwood MIG Stud Welding Kit is rated 4.3 out of 5 by 7.
Rated 5 out of 5 by from Worked well It worked well, ended up using a few more studs than I had anticipated, I think due to thicker metal and where the dent was on the fender on my 1970 pickup. Pretty sure a person would not have to use as many studs a vehicle with thinner metal. Did some practicing on some scrap repair panels by denting them and then using the studs and slide hammer to remove the dents. Highly recommend practicing on welding the studs and using the slide hammer on scrap pieces.
Date published: 2018-05-13
Rated 5 out of 5 by from Timesaver!! This kit works exactly as advertised. Once the stud tip is set up on the mig gun, the rest is easy. I used it with flux core .030 wire to pull a large dent on my truck's bedside and it worked well, and sure was handy to have. This was much better than dropping $400+ on a stud gun that might only get used once or twice (hopefully).
Date published: 2018-01-31
Rated 5 out of 5 by from GREAT SLIDE HAMMER EVERYTHING I EXPECTED. WORKS GREAT. COMPARED TO OTHER BRANDS OF PULLERS.
Date published: 2016-05-05
  • y_2018, m_6, d_21, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_20636, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Can I buy just the stud welding nozzle

Asked by: fourdracn
The welding nozzle is unfortunately not available separately.
Answered by: Scott C
Date published: 2018-06-13

Will it fit a Miller 215 Welder? I don't have a Tweeko to compare.. I realize you sell welders but it's seriously dodgy that you won't say what mainstream MIG welders it fits... Dimensions could be helped with a drawing.

Asked by: Miller
The nozzle from this unit has an internal diameter of 21 mm and slips over your existing nozzle. If your nozzle is this size or smaller it would work perfectly.
Answered by: Scott C
Date published: 2018-05-23

Would this work on a Lincoln 175 welder

Asked by: Mtfran707
If your Lincoln utilizes a Tweeco Style nozzle then this should be applicable.
Answered by: Kelly H
Date published: 2018-04-23

You can use this kit but with a flux core welder?

Asked by: hector
Technically it could but, generally flux cored wire burn hot enough to make it very hard to weld thin sheet metal such as you would be with this kit.
Answered by: Scott C
Date published: 2018-02-06

Can I order from australia

Asked by: Keith
We have distributors in Australia that are hopefully close enough for you to work with. http://www.eastwood.com/customer-service-onepage This link will lead you to our list of distributors.
Answered by: Scott C
Date published: 2018-01-02

I have the Eastwood MIG 175 can I use this to pull dents from aluminum? I was thinking of using it on the spool gun. Will the studs weld to aluminium being that they are steel.

Asked by: Jstoneinc
The studs will not stick to aluminum. There are special stud pullers out on the market for this purpose, unfortunately we do not carry any of them.
Answered by: Scott C
Date published: 2017-11-11

Hi, will this kit fit my euro torch?

Asked by: Nostrils
The nozzle from this unit has an internal diameter of 21 mm and slips over your existing nozzle. If your nozzle is this size or smaller it would work perfectly.
Answered by: S Church
Date published: 2018-02-20

Can I unscrew the stud holder on the slide hammer, remove the collet and screw on other stud hammer attachments?

Asked by: KennethV
We have never tested this tool with any other attachments.
Answered by: S Church
Date published: 2018-04-08
  • y_2018, m_6, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_20636, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood MIG Stud Welding Kit

Eastwood MIG Stud Welding Kit

Item #20636

The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder
Quantity:
Quantity: close

In stock

Only $99.99

 

< Back

Details

The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder.

  • Remove dents using your MIG welder
  • Works with Eastwood MIG welders or other welders with a Tweco style torch
  • 3 pound hammer for perfect amount of power to pull dents
  • Hammer is machined for a comfortable and strong grip
  • Eliminates the need for expensive stud welders
  • Quick set-up and easy to use

With this kit you will be able to repair and remove dents from sheet metal. It includes everything you will need to start repairing dents with your MIG welder. The kit includes MIG Stud Nozzle, Slide Hammer, and 100 2mm Pins. The nozzle included in this kit was designed to work with Tweco style nozzles and may or may not work with other style MIG torches.

The Eastwood MIG Stud Welding Kit transforms your MIG welder into a Stud Welder which can be used to repair and remove dents from sheet metal. This kit includes everything you will need to start repairing dents with your MIG welder. The kit includes MIG Stud Nozzle Slide Hammer 100 2mm Pins. The nozzle included in this kit was designed to work with Tweco style nozzles and may or may not work with other style MIG torches.


More info...
< Back

Contents

The following items are included with your Eastwood MIG Stud Welding Kit:
(1) Stud Welding Nozzle
(1) Slide Hammer
(1) 2mm Hex Key
(100) 2mm Pins (replacement pins 31041C)


Instructions

Click here for product instructions


Safety

Use protective, heat resistant gloves and clothing when using the Eastwood MIG Stud Welding Kit. Never touch work surface or Stud Welding Nozzle until it they have completely cooled.


Click here to see safety products


Warranty


Accessories

31041C Replacement Draw Pins
20286 4-1/2" Eastwood Electric Angle Grinder
12036 Flap Disc, 4-1/2" Zirconia, 40-Grit
11979 Eastwood Professional 7-Piece Hammer & Dolly Set


Product Video


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: