Item #
31914
BRAND: MotoFeet
MotoFeet Pontiac Engine Stand
Store, display or ship your engine with MOTOFEET Engine Stand
Store, display or ship your engine with MOTOFEET Engine Stand
Store, display or ship your engine with MOTOFEET Engine Stand
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Store, display or ship your engine hassle-free with MOTOFEET Engine Stand. MOTOFEET features a rugged all steel construction and durable powder-coated surface.
The Original MOTOFEET is made in Arizona and is hand crafted for the specific engine types.
Warranty
Specifications
1959-1969 Blocks have only (2) motor mount holes on each side of the block (see #2 & #5). These blocks will fit any 1964-1974 Pontiac A-body except cars originally equipped with a 455, which used a 3-bolt style mount.
1970-1976 Blocks have all (5) bolts holes (see above) but were not always tapped. The additional holes were done to fit the 2nd generation Firebird/Trans Am frame. These blocks are very interchangeable and will fit any 1959-1979 Pontiac V8 motor mounts.
1977-1979 Blocks have only (3) motor mount holes (see #1, 3 & 4).
Pontiac Engine Information
265 1980-81
287 1955
301 1977-81
326 1963-67
347 1957
350 1968-77
366 1970
370 1958
389 1959-66
400 1967-79
421 1961-66
428 1967-69
455 1970-76
In the Box
Contents
Guides & Accessories
Reviews
Rated 5 out of
5
by
LibertyCosworth from
Well built, low profile, will work once adapted to fit the '69 block
MotoFeet Pontiac Engine stand. Talked with the company owner first - knew the stand was configured for the later engine block engine mount configuration from the start, and that I would have to adapt the stand to fit to my 1969 Pontiac engine block. No problem there at all. Stand as delivered seems well balanced, nicely welded and finished. It has a nice low profile. I plan to add casters, a lower cross brace and lockable feet for stability for use as part of an engine run-in stand. I really appreciate that, as a starting point for a custom built combination storage and run-in stand, I was supporting a small business calling the USA their home, sourcing USA vendor supplied materials.
Date published: 2023-06-08
Rated 4 out of
5
by
uncle don from
Slight modification
doesn't exactly fit my motor like it said it would. We modified it to fit.
Date published: 2023-08-11
Rated 1 out of
5
by
Tahoe011 from
Failure to Launch
Never bought it. I ordered it and the order sat there for over a month as "processing." I finally sent Eastwood a note to cancel the order and I ordered the stand through another supplier.
Date published: 2021-07-15
Questions & Answers
what motofeet fits 1967 Oldsmobile 400 engine
Motofeet does not currently have a stand for Oldsmobile engines.
Date published: 2020-08-17
Does this Pontiac engine cradle have provisions to mount casters, if so, what type?
31912 MotoFeet 4 Piece Steel Castors https://www.eastwood.com/motofeet-4-piece-steel-castors-for-engine-stands.html
31913 MotoFeet 4 Piece Rubber Castors https://www.eastwood.com/motofeet-4-piece-rubber-castors-for-engine-stands.html
Date published: 2020-06-23
Will this fit on a pre 69 Pontiac block with only 2 motor mount holes ( # 2 and # 5 position I think )
Please refer to picture diagram on the page. 1959-1969 Blocks have only (2) motor mount holes on each side of the block (see #2 & #5).
Date published: 2020-08-02
Will it work on a 1967 Pontiac 326
MotoFeet Pontiac Engine Stand
$74.99
In Stock