Eastwood Motorized Bead Roller and Stand

Item #20622 Motorized Bead Roller

Eastwood Motorized Bead Roller and Stand
A quality bead roller for sheet metal work, with electric power and foot pedal control.


Economically Ships by Fed Ex in 2 Boxes - No Truck Shipment needed!

Motorized Bead Roller Box 1 of 2

Item #20622A

$941.00
- +
Quantity:
Quantity: close

In stock

Motorized Bead Roller Stand Box 2 of 2

Item #20622B

$58.99
- +
Quantity:
Quantity: close

In stock

Total $0
OR

Details

A must-have tool for custom sheet metal work, with electric power and foot pedal control.

The Eastwood Motorized Bead Roller with Stand:

  • Create professional quality beads in steel and aluminum sheet metal
  • Powerful 1/6hp 120v reversible electric motor make solo work easy
  • Infinitely variable foot pedal motor control leaves hands free
  • 24 in throat leaves plenty of room to work around even large panels
  • Rated for up to 18 gauge steel and 16 gauge aluminum
  • Includes 1/2" Die Set
  • Forms precise beads, joggles and bends

Ships by Fed Ex in two boxes to avoid heavy freight and lift gate charges.

Eastwood Motorized Bead Roller and Stand

Create professional quality beads in steel and aluminum sheet metal

This Eastwood bead roller has a 1/6hp 120v electric motor which makes it much easier to work large or long pieces without the help of friends. With a typical manual roller you need to crank the handle and manipulate the work piece at the same time, but not with our power roller. The reversible, infinitely variable, foot pedal control lets you control the speed and direction of the rollers, even while both hands are on the work. The 24 inch throat means you can roll a bead right down the center of a 4 foot wide panel if you want to. This professional strength bead roller will form beads, joggles and bends in steel sheet up to 18 gauge, and aluminum up to 16 gauge. This unit comes complete with dies to make a variety of shape beads and bends as well, for unlimited uses, right out of the box. The shaft size for optional die sets is 3/4" diameter.

Eastwood Motorized Bead Roller and Stand

Professional Quality Bead Roller

The Eastwood 24 inch Motorized Bead Roller is a professional tool that enables you to make precise bead forming joggles or bends of up to 18 gauge mild steel or 16 gauge aluminum. The 24 In. throat enables you to form the center of a 48 inch wide work piece. The strong 1/6 HP 120v motor enables you to perform tasks without needing a second hand to manually power the unit. Control the unit with the infinitely adjustable foot pedal. This machine has the ability to operate either forward or backwards for more control-ability. The shaft size is 3/4" diameter. Bead Die Sets for the Eastwood 28178 Manual Bead Roller are not compatible with this power bead roller.

Eastwood Motorized Bead Roller and Stand

Safety

Wear work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands arms and face. Keep fingers and hands away from moving parts when operating.


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


   

Customer Reviews

Questions & Answers