- 1 HP MultiTool Grinder
- 2 Inch x 36 Inch Abrasive Belt
- 7 Inch disc
- Quick change belt
- Automatic Tensioning
- Quick Track Adjustment
- 4 areas of abrasive contact – Flat Platen, Contact Wheel, Slack Belt and 7” Abrasive Disk
Perfect tool for all of the following tasks.
This versatile tool allows you to remove material up to 5 times faster than with the equivalent grit grinding wheel. The unit offers 5 grinding areas in one machine with four work surfaces on the Multitool itself. The majority of work is generally performed on the front contact wheel, but the unit also offers flat platen grinding, slack-belt grinding, disc grinding, and stone wheel grinding. Belts change in seconds from grinding, to sand, deburr, or polish. A variety of abrasive and polishing belts as well as discs are available to get the job done right.
• (1) 1HP Motor
• (1) MultiTool Belt Grinder (Attached)
• 80 Grit 2 x 36 belt
• 7" Abrasive
• Instruction and hardware
Motor: 1 HP
Belt Width (inches): 2
Belt Length (inches): 36
Belt Speed: 5400 feet per minute
Contact Wheel Diameter (inches): 3.5
Platen Size (inches): 2 x 5.875
Disc Size (inches): 7
Disc Speed (rpm): 3450
Weight: 56 lbs.
Always wear ANSI approved ear, eye, and hand safety equipment when using this type of tool. Use appropriate belts for grinder speed. Only operate with guards in place.
Click here to see safety products
2 year manufactures warranty
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov