About One Shot Hardener 16 oz
One Shot Hardener was designed to accelerate drying time of all 1 Shot alkyd based paints including: Lettering Enamels, Bulletin Colors, Gloss Enamels and Pearlescent Enamels. 1 Shot Hardener will improve adhesion to most substrates as well as extend color life and increase gloss. Also, will aid in preventing lifting when an automotive clear coat is to be applied over the paint. One 16 fluid ounce can.
One Shot Hardener is sold in a 16 fluid ounce can. Enough hardener to activate over a gallon of paint. NOTE: Pot Life of catalyzed paint is 2-3 hours.
The Touch-Up Spray Gun (34044) does a great job of applying clears and paints in small areas.
Micro batches can be mixed for touch-up using one drop of hardener to 9 drops of paint. This hardener like most paint hardeners contains a cyanide compound. Local exhaust ventilation or
Tech Data Sheet
Add up to 10% by volume of 1 Shot Hardener to 1 Shot Lettering Enamel, Pearlescent, Bulletin Colors and Gloss Enamels and mix thoroughly. Add Hardener before adding any reducers. Thinning with a reducer should not be necessary. If thinning is required use (37003ZP) 1-Shot Low Temp Reducer only. NOTE: Pot Life of Catalyzed paint is 2-3 hours. Only mix the amount of paint that can be applied in this time frame. Clean equipmment promptly with 1 Shot Brush Cleaner or Lacquer Thinner. Make sure cap is securely tightened on hardener to prevent crystallization.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov