Painless 2007-2012 GM Gen IV 4.8-6.2L Harness (4L65E-4L85E) (Incl. DOD & VVT) 60526
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.
This harness is designed for use on any 2007-2012 4.8L, 5.3L, 6.0L, & 6.2L Vortec truck engines with throttle by wire. It uses the factory ECM & TCM and will operate engines with or without variable valve timing (VVT) and active fuel management (displacement on demand or DOD). This harness does not support flex fuel operation. Included with this harness is a 10 circuit weatherproof fuse block & mounting bracket, GM color coded wires with labels, and all the required terminals and connectors for easy installation.
This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.
We recommend checking the online manual for the full list of required mating parts prior to ordering.
Part Number: 60526Engine: 4.8, 5.3, 6.0, 6.2L
Trans.: 4L65E
Specifications
| Number of Circuits: | 10 Fuses with 2 Ignition, 1 Cooling Fan & 1 Fuel Pump Relay |
| Harness Length: | 4 Feet Between Engine and ECM |
| Fuse Type | Mini Blade |
| Firewall Passthrough | Grommet |
| Color Code Based | 2007 - 2012 Vortec Truck/SUV |
| Circuit Designations: | Printed Wire Tags on all Connectors and Open Ended Wires |
The Fuse Block Protects The Following Circuits:
- ECM and Data Link Connector B+
- ECM and Malfunction Indicator Lamp
- Fuel Pump
- Heated O2 Sensors
- Ignition Coils
- Injectors
- Mass Airflow and Valve Lifter Oil Manifold (DOD)
- TCM
- TCM B+
- Transmission
- 40 Amp Cooling fan Relay and Circuit Breaker (ECM Activated)
- 20 Amp Fuel Pump Relay
- 40 Amp & 20 Amp Ignition Relays
This harness includes connections for the following components:
- Accelerator Pedal Position Sensor
- Alternator (Including a 4 gauge power wire)
- Brake Switch
- Cam Position/Cam Phazer Sensor
- Cooling Fan
- Crank Position Sensor
- Data Link Connector
- Driver/Pass Front O2 Sensors
- Driver/Pass Knock Sensors
- ECM
- Engine Coolant Temperature
- Fuel Pump
- Grounds
- Ignition Coils
- Ignition Switch Signal
- Injectors
- Input Speed Sensor 4L80E/4L85E
- Malfunction Indicator Lamp
- MAP Sensor
- Mass Airflow / Intake Air Temperature Sensor
- Oil Pressure Sensor
- PRNDL Switch
- Reverse Lights
- Starter
- TCM
- Throttle Body
- Transmission
- Valve Lifter Oil Manifold (DOD)
- Vehicle Speed Sensor
- VSS Output for Speedometer
In the Box
Guides & Accessories
Instructions
Reviews
Questions & Answers
