Painless Direct Fit Bronco Harness w/switches (1966-1977) - 28 Circuits
- 90-Day Returns
- Technical Support
- In Stock
Designed with input from Ford Bronco owners everywhere, this Painless Performance 28 circuit direct fit 1966-1977 Bronco wiring harness sets a new standard in chassis wiring. This harness includes a molded plastic glove box that not only replaces the factory cardboard one that also mounts our weatherproof fuse block. You'll also find factory-style molded exterior light connectors, Ford turn signal connectors and a Ford dimmer switch connector. This harness has most of the factory connections are already pre-terminated. Also available is an 80+ page full color step by step install manual with over 80 photos, drawings and harness schematics. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation.
This kit includes the following switches: Headlight, Wiper, Ignition, and Dimmer.
Here are some of the great features included with this kit.
The heart of your new Bronco wiring harness is centered around this weatherproof fuse block. With 28 total circuits and 9 accessories circuits, this harness will support most features and add-ons you want to add to your Bronco.
Underneath the fuse block we can see the weatherproof terminals and covered power supply post.
Included with your Bronco harness is a custom molded glovebox. This is also the mounting location for your fuse block.
Properly mounting and routing your wiring harness is a critical step to avoid any premature wear to your wiring. We provide you with enough zip ties and grommets to make sure you avoid any issues.
Included in your parts kit you’ll find terminals, weatherproof splices, screws, extra fuses etc.
One of the many features of your new Bronco harness allows you to add an aftermarket tach.
No matter if you have an early, mid, or later model column, we’ve provided you with a pigtail to adapt them all to your new Bronco harness.
All of your rear lights are properly insulated making for a plug-n-play install.
As with every wiring kit from Painless, you’ll find our signature printed wire. They tell you the wire number, where it’s coming from, and where it’s going to.
Harness Length: Factory Fitment
Fuse Type: Blade & Maxi Fuse
Firewall Pass through: Multiple Grommet
Color Code Based: 1966 - 1977 Bronco
Circuit Designations: Printed Wire Tags on all Connectors and Printed on Wire for Open Ended Wires
Part Number: 10113
Year: 1966 - 1977
Engine: Carbureted or Any Stand Alone Fuel Injection
Hazard Flasher, Turn Flasher, Horn Relay, Heater Switch, Turn Switch, Wiper Motor, Dash Indicators, Lights and Instruments, Wiper Washer, Headlights, Park Lights, Turn Signals, Horn, Dimmer Switch, Voltage Regulator, Tail Lights and a parts kit that includes the neccessary factory Ford terminals to reuse factory connectors for the Headlight Switch, Ignition Switch, Wiper Switch, Dash Mounted Hazard Switch, Dash Label Lights, 1973-UP Turn Signal Switch, 1966-1967 Turn Switch, Brake Warning Light
Complete Ford Color-Code Direct Fit Wiring Harness for:
• 1966 Ford Bronco
• 1967 Ford Bronco
• 1968 Ford Bronco
• 1969 Ford Bronco
• 1970 Ford Bronco
• 1971 Ford Bronco
• 1972 Ford Bronco
• 1973 Ford Bronco
• 1974 Ford Bronco
• 1975 Ford Bronco
• 1976 Ford Bronco
• 1977 Ford Bronco
This harness includes circuits for:
1. A/C & Heat
2. Accessory #1 B+
3. Accessory #2 B+
4. Accessory #3 B+
5. Accessory #4 B+
6. Accessory #5 Switched B+
7. Accessory #6 Switched B+
8. Accessory #7 Switched B+
9. Accessory #8 Switched B+
10. Accessory #9 B+ In ACC. Position
11. Backup Lights
12. Brake Lights
14. Cigarette Lighter
15. Dome and Courtesy Lights
16. Electric Choke
17. Emergency Flashers