Item # 33278 BRAND: Eastwood

Eastwood PCS-250 Dual Voltage Powder Gun

New & Improved System with 2 voltage settings for great coverage in tight spots and large areas
New & Improved System with 2 voltage settings for great coverage in tight spots and large areas
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 11.27ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$157.99
Loading...
Loading...
Save for Later
New & Improved System with 2 voltage settings for great coverage in tight spots and large areas

1 year Warranty Included

Add an Eastwood Service Plan for additional protection?

Learn More

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood PCS-250 Dual Voltage Powder Gun

Product Overview:

Description

PCS-250 Powder Coating Gun

The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action.

Features:

  • Extremely durable finish
  • Coat and cure in under an hour!
  • Easy to apply
  • Quick color changes
  • Economical
  • Operates on standard 120v / 60Hz household current
  • Versatility with two settings for improved coverage
  • Low 15,000-volt setting
  • High 25,000-volt setting for multi-coat coverage over larger areas
  • Increased powder adhesion
  • Minimal overspray
  • Color-Coded cables for easy setup
  • More trigger-room for additional comfort
  • Larger ground clamp
  • Clear bottle allows you to see powder color, level and fluidizing action
  • Larger internal passages for improved powder flow
  • Refined power supply for more consistent coverage and powder-build

Warranty

One Year Manufacturer's Defect Warranty.

Designed, engineered and tested to Eastwood's specifications.

Specifications

15KV/25KV Dual voltage output New and improved Ground Clamp provides a better Ground Color Coordinated cabling for easier setup New Clear bottle makes it easy to see powder level and fluidizing action. Additional 1/2" of trigger room makes it easier and more comfortable to use

FAQs

Eastwood Powder Coating Videos - CLICK HERE


(Q) How long does the baking process take?
(A) For improved flow out (less "orange peel"), bake coated parts at 500 degreesF until powder flows out (about 3-4 minutes for light sheet metal parts), then turn down the heat to 400 degreesF for a full 15 minutes.

(Q) What are the electrical requirements?
(A) This HotCoat Gun requires 110-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-240VAC to 110-125VAC as long as the transformer can handle 2 amps.

Shipping

Ships Via Fedex

In the Box

Contents

PCS-250 Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, and an empty 8-oz. bottle.

Guides & Accessories

Instructions

Click here for instructions


Safety Information

Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.

Accessories

15635 Powder Coating Oven
31289 Pancake Compressor
11536 Powder Coating Accessory Kit
High Temperature Masking Tape
Eastwood Hotcoat Powders

Application Tips

Advantages of Powder Coating

The PCS-250 Dual-Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable and longest-lasting finishes available. You'll find powder coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer.

Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections. One 8 oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy since you can simply sweep-up the over-sprayed powder. This powder can be reused as well if it's not contaminated. Eastwood powders contain no environmentally harmful solvents so you can be planet-conscious as well. HotCoat powder coating requires a 5-10 psi compressed air source and a dedicated electric oven (or toaster oven).

Powder Coat in Your Own Garage

Owning a dual-voltage electric powder coating gun means you can apply this technique to springs, valve covers, tri-flow radiators, vehicle body panels and anything else that needs a quality finish. One quick-change empty powder bottle is included and you can easily add more. The tool is designed to our exact specifications with a handheld activation switch, air inlet, removable diverter tip and grounding system.

New to powder coating? Our YouTube channel has a large playlist of powder coating videos that how to apply powder to different parts and what other equipment you might need. Our tech team is also available seven days a week by phone or email with free expert advice and solutions. Continue down this page for suggestions on accessories and safety equipment or visit our customer review section. Eastwood has a 100 percent customer satisfaction guarantee on every piece in the HotCoat powder coating system.

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.21ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Does this new model fix the blow-by the old bottle had where it leaks since there is no seal?

Asked by: Anon
We are not aware of any blow-by issues with this gun.
Answered by: Nick BC
Date published: 2022-05-31

I recently bought the PCS-250 dual voltage and was wondering if the voltage toggle switch it supposed to light up when pressing the button? On my PCS-150 there is a red light that comes on which indicates charging gun when the button is pressed.

Asked by: BoltOn Mounts
There is no light on this gun on the toggle switch.
Answered by: ZachC
Date published: 2022-05-02

The dual voltage gun says it can coat larger areas. How big is a large vs small area? I don't know which gun I should get.

Asked by: Eagle
This could powder coat items as large as wheels/ rims for a vehicle.
Answered by: Kelly H
Date published: 2022-04-27

Any harm in trying a dimmer switch on the power input in order to tune the output voltage for a stubborn application?

Asked by: Siginu
We do not recommend adding a dimmer switch to this unit.
Answered by: ZachC
Date published: 2022-04-19

The details section says to cure the coating in an electric oven. Is there something special about using electric VS a gas oven. 

Asked by: Waterdog08
Powder coating is a flammable substance and should not be cured in a gas oven. The electric heating element of a standard electric stove works great.
Answered by: ZachC
Date published: 2022-03-08

can i use this product in india where voltage is 220. if not please suggest what can be done.

Asked by: prajwal
This HotCoat Gun requires 110-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-240VAC to 110-125VAC as long as the transformer can handle 2 amps.
Answered by: ZachC
Date published: 2022-02-21

sprays powder everywhere whenever I hook the air up to it. The handle doesn't have any effect on how much powder sprays out of it; it just starts when the air is hooked up and ends when I disconnect it.

Asked by: Badgirl
You most likely hooked your 150+ psi air hose directly to the gun, effectively breaking it. The gun should be hooked up to no more than 10 psi of pressure, as noted in all of the instructions that come with it (pretty sure it comes with a r. Source: I made this mistake and broke my gun.
Answered by: paintgunDestroyer
Date published: 2021-12-27

I bought the PCS 250 and the sample kit. Looking for some additional powder. Will the Hot coat powder work in the gun?

Asked by: Don16
Any of the powders we sell on our website will work in any of the powder guns we offer.
Answered by: Kelly H
Date published: 2021-11-09
  • y_2022, m_7, d_4, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_33278, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 12.23ms
  • QUESTIONS, PRODUCT
Eastwood PCS-250 Dual Voltage Powder Gun
$157.99
In Stock