Item # 15271Z BRAND: POR-15

POR-15 Hi Temp Aerosol Flat Black 44118

POR-15 Hi Temp Aerosol Flat Black 44118
POR-15 Hi Temp Aerosol Flat Black 44118
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 11.31ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$26.99
Loading...
Save for Later
POR-15 Hi Temp Aerosol Flat Black 44118
  • 90-Day Returns
  • Technical Support
POR-15 Hi Temp Aerosol Flat Black 44118

Description

POR-15 High Temp Paint is capable of withstanding extreme temperatures up to 1200 degrees F and will resist cracking, chipping, and peeling. It is also extremely weather, salt and moisture resistant. Sandblasting is the optimum surface preparation. Can be used on all cars, domestic or foreign. Meets or exceeds properties and requirements of MIL C 13370.

Contents

Net weight 15 ounces

Accessories

10041Z PRE Painting Prep, 10061Z Rust Encapsulator, 51483Z Rust Convverter, 19416Z Fast Etch, 13651Z Rubberized Rust Encapsulator, 14995Z Patina Preserver, 16037 Rust Dissolver

Application Tips

Surface Preparation: Bare MetalUsing POR 15 Cleaner Degreaser clean all surfaces shall be free of loose rust, millscale and contaminants such as oil, grease, dirt, and salts. Before any surface preparation is attempted, oil and grease must be removed by employing PRE painting Prep. Use Near White Blast Cleaning to to remove millscale, rust, and other contaminants and leave a roughened surface. You mustuse POR 15 Metal Prep first if you are painting on new steel, galvanized metal, aluminum, or any smooth metal surface.

Safety Information

Always wear eye, skin and respiratory proetction. Apply in well ventilatred area away from open flame. Consult MSDS for specific safety warnings and precautions

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.18ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Can i use on motorcycle cylinders 

Asked by: Mike73
You should be fine heat rating is 1200 degrees
Answered by: eastwood alsip
Date published: 2021-04-19

Is it necessary to put in 400 degree oven to use product?

Asked by: R D Crum
It would need to let air cure for 24 hours, followed by a bake at 300 degrees for 15 mins and a cool down.
Answered by: SeanA
Date published: 2020-08-24

Will it stay on a aluminum rad

Asked by: billcourt
No, this if for exhaust manifold.
Answered by: R D Crum
Date published: 2014-11-23
  • y_2021, m_9, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_15271Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 35.39ms
  • QUESTIONS, PRODUCT
POR-15 Hi Temp Aerosol Flat Black 44118
$26.99
In Stock