Memorial Day Sale
Fathers Day Gift Guide
  • Home
  • POR-15 Super Starter Kit/Gloss Black
POR-15 Super Starter Kit/Gloss Black is rated 4.5 out of 5 by 28.
Rated 5 out of 5 by from Worked better than expected Have to say I was pleasantly surprised at the results. Had a rusted pan under an indoor heat pump air handler that had leaked and rusted the pan. After scraping the pan and cleaning out all the residue, I used the cleaner and rinsed and dried, then spread the POR15 right over the remaining rust. It did a really nice job of covering the rust and the pan looks as tho it came with the black coated liner. I'm happy with the results and it was much easier than I was expecting.
Date published: 2017-09-05
Rated 5 out of 5 by from Hope it works for long term Bought this to try to protect an area under the cowl grill of a '71 Challenger. Area is difficult to access to clean and coat and not visible without using a mirror. Based on past results with POR-15 I believe this will work if I got it clean enough. At least the area has some protection and the Starter Kit is just the right size to perform the smaller jobs sometimes necessary. The kits are very complete and contain good quality accessories along with the Quality POR-15.
Date published: 2015-12-31
Rated 5 out of 5 by from Great product I recently used the starter kit, and am completely satisfied with how this product works. If you follow the instructions to a tee, and don't deviate this stuff works great. I do wish it came in a spray can, but aside from that, it covered the rust, and was actually easy to prep for paint. Also, the paint stuck just fine. Will be using it on the frame and suspension parts as well.
Date published: 2015-11-14
  • y_2019, m_5, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_US, sid_13596ZP, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Can I use this kit to treat a master cylinder? What flat top coat will work with this kit?

Asked by: dtwbcs
The only product that we have that is formulated for use on a Master Cylinder is our Brake Gray Item #11756Z https://www.eastwood.com/eastwood-brake-gray-aerosol.html
Answered by: Bob G
Date published: 2019-04-29

What would the difference of results be for using the POR-15 starter kit on wheel well rust vs using Eastwood pre painting prep and rubberized undercoat. Looking for long term rust treatment (prevent rust spreading)) solutions.

Asked by: Roman
You can use our Rubberized Rust Encapsulator Item #13651Z. This will keep your rust from coming back. Link for this product is below. https://www.eastwood.com/eastwood-rubberized-rust-encapsulator-undercoating-black.html
Answered by: Bob G
Date published: 2019-04-29

Black Bumper on jeep is rusting,paint chipping off. Do I need to remove all the paint?

Asked by: Ronaldo
The important thing is to remove the paint from about 1 inch back from all the rust areas. Any rust product will need to be applied directly over rust in order for the product to do its job.
Answered by: Bob G
Date published: 2019-04-16

Was wondering if this product-POR 15 will work on a lawn mower deck? I have tried epoxy paint and it does not last.

Asked by: Dave
We have never tested this product under those circumstances. If you would decide to use this on your Mower deck, make sure you follow all the instructions.
Answered by: Bob G
Date published: 2019-01-06

If a pint cover 25 square feet in 2 thin coats.. Then why does this pint only cover 6 square feet? Wouldnt the pint cover the content coverage chart of 25 sq ft per pint? Am i missing something

Asked by: Blucifer420
The can of Black Por 15 in this kit is only 4 oz. not a pint. and this 4 oz. can will cover 6 square feet.
Answered by: Bob G
Date published: 2018-12-17

what gun could I use to spray por 15 into rocker panels and inside doors?

Asked by: rusty
Any HVLP gun can be used with a 1.5mm or 1.7mm needle/nozzle.
Answered by: Kelly H
Date published: 2018-09-12

Can POR15 be used over power brushed rustoleum primer or does it have to be completely stripped off?

Asked by: HP 289
Por 15 is designed to be used on rusty bare metal. Painting over an existing paint will nullify any benefits of the product.
Answered by: Scott C
Date published: 2018-08-11

If your metal is clean & sanded you just treating to get into any small pitting areas is it necessary rinse cleaner & metal prep off? Can you just wipe down good with cleaner allow it to dry & then brush on metal prep and let it dry then put on POR15?

Asked by: Marv
To ensure maximum adhesion and durability POR 15 recommends using all the steps to this kit.
Answered by: Scott C
Date published: 2018-09-06
  • y_2019, m_5, d_25, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_13596ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

POR-15 Super Starter Kit/Gloss Black

POR-15 Super Starter Kit/Gloss Black

Item #13596ZP Brand: POR-15

Kit lets you try the "Paint Over Rust" system
Quantity:
Quantity: close

In stock

Only $21.99

 

< Back

Details

We created the SUPER STARTER KIT in response to requests from customers anxious to try out the entire 3-step rust-stopping system, as well as those customers who need only a small amount of product to cover the metal they plan to paint.

You'll get a 4 oz. can of POR-15® Gloss Black (enough to cover 6 square feet with 2 coats), a half-pint of POR-15® Metal Prep, two wooden handle paint brushes, and a pair of our special high-dexterity surgical latex gloves, PLUS an 8-ounce bottle of our famous POR-15® Cleaner Degreaser, the world's greatest WATER BASED degreaser.


More info...
< Back

Contents

4 oz of Black POR-15 8 oz of Cleaner Degreaser 8oz of Metal Prep Gloves application brush


Instructions

POR-15® Rust Preventive Coating Data Sheet

POR-15® Rust Preventive Coating Technical Data Sheet


Safety

Always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings.


Warranty

Made in the USA


Application

This kit covers about 6 square feet at two coats.



Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: