- Home
- Pressure Abrasive Blaster 300 Pound
Pressure Abrasive Blaster 300 Pound
Pressure Abrasive Blaster 300 Pound
Item #22004-8013LG
Details
This ALC Model 300 has a long 125 minute blasting time.
- ASME Certified
- 250 lb media hopper
- 25' 1/2" ID hose
- Blast Hood with Bump Cap
- Moisture Separator
Runs on as little as 7cfm @ 80 psi with the 3/32" nozzle. The included 1/8" Nozzle requires 15 cfm @ 80psi and the included 5/32" nozzle requires 25 cfm @80 psi. Fill with screened dry media only. Pressure blasters work best when the valve at the bottom of the tank is only slightly opened. Wear appropriate safety gear. Be sure to wear an appropriate respirator.
Blast hoods provide NO respiratory protection. Wear all appropriate safety gear and respiratory protection. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY.
Contents
The Model 300 has a 250 lb. capacity and includes a 25' quick release sand hose a moisture separator, 2 1/8" nozzles, 3 5/32" nozzles, 3 seal blocks, and instructions.
Safety
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation
Application
Runs on as little as 7cfm @ 80 psi with the 3/32" nozzle. The included 1/8" Nozzle requires 15 cfm @ 80psi and the included 5/32" nozzle requires 25 cfm @80 psi. Fill with screened dry media only. Pressure blasters work best when the valve at the bottom of the tank is only slightly opened. Wear appropriate safety gear. Be sure to wear an appropriate respirator. Use of Walnut shell media is not recommended.
Click here for product SDS information
Attention California Residents - Proposition 65

Customer Reviews
Questions & Answers