Product Overview

QA1’s Level 3 Drag Kit is a complete solution for 2nd Gen F-body owners who drag race their car. This complete solution replaces your entire front and rear suspension, optimizing your car for weight transfer and straight-line performance. The 4-way adjustable MOD Series offer plenty of control and ride height adjustability. With the rear suspension allowing additional space for drag radials or slicks, you have the perfect combination.

Bind Free, Light-weight Front Suspension
QA1's tubular front control arms stand out as some of the lightest on the market. Beyond their lightweight design, racers have the flexibility to fine-tune launch characteristics using an adjustable droop stop. The inclusion of QA1's low-friction ball joints and ultra-low-friction composite bushings enhances weight transfer, ensuring smooth and bind-free movement. When paired with QA1's MOD Series coilovers, this kit offers plenty of control over front-end movement.

Customize Your Stance
Factory coil spring and leaf springs limit your ability to achieve the perfect stance on your Camaro or Firebird. Upgrading to QA1’s coilovers and a tubular 4-link provides 0 to -2 inches of adjustability in the front and 1.25 inches of ride height adjustability in the rear, letting you dial in exactly the look you want.

Fit Wider Wheels & Tires
Designed to work with both standard and mini-tubs, this system offers generous clearance for up to 12-inch-wide wheels. This results in a significantly more aggressive stance and improved traction and performance. Trailing arms are biased inboard to further improve wheel clearance, and benefit applications with narrowed axles.

Note: Achieving maximum wheel and tire width will require mini tubs. 

Shock Tunability
4-way adjustable MOD shocks help drivers easily adapt to any surface and conditions, whether at a bracket event or racing no-prep. High force curve capabilities ensure important factors like weight transfer and wheel spin can be dialed in to get your Camaro down the track faster than ever.

Easy, Installation & Adjustment
Thoughtful design meets effortless installation with a completely bolt-in front suspension and a 4-link requiring minimal welding. You'll experience a painless installation and setup process, where adjusting ride height, pinion angle, or wheelbase is as simple as a few tweaks – no link removal required.

Note – Welding required

Made in the USA
QA1 suspension is proudly made in Lakeville, Minnesota.

Fitment Notes
Rear ride height range from axle centerline to fender arch is 10.75 in. to 12 in. for Camaros, and 13.75 in. to 15 in. on Firebirds.
Wheel and tire fitment should be verified on the vehicle
Welding Required
Includes Spanner Wrench
May require Exhaust Modification