- Rage Ultra Body Filler .8 Gallon
Rage Ultra Body Filler .8 Gallon
Item #14157ZP Brand: EverCoat
About Rage Ultra Body Filler .8 Gallon
Rage Ultra is the world's best sanding body filler. Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology. Its non sag formula has excellent filling properties, while eliminating the need for finishing putty. Rage Ultra contains ZNX 7 which quickly provides superior adhesion to galvanized steel and aluminum, eliminating the risk of pulling back the featheredge. .8 gallon/3 liters, includes cream hardener.
.8 gallon, 3 liters
31273 Mixing Board, 13919 Body Filler Spreaders, 13521zp Contour Glazing Putty, 13522zp Contour sprayable polyester body filler, 50240zp EW urethane Primer, 51136 EW Paint Color Chart, 12776 Evolution paint Gun, 51550 Concours Paint Gun, 31160 7pc Sanding Block set
Read all directions and warnings prior to using Evercoat products. Always wear eye, skin and respiratory protection. Use in a well ventilated area. Never return mixed filler to canKeep can closed and store in a cool dry place. VOC 1.64lbs/gallon.
Made in USA
Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Thoroughly dry the surface before repairing. Keep the repair area small. Use 80 grit to remove the paint and featheredge. Stir the body filler before using. Knead the cream hardener. Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4 inch diameter puddle. Puddles larger than 4 Inch in diameter will require additional hardener. Mix thoroughly until uniform color is achieved.
Questions & Answers
Customers also viewed:
All you need for your sanding, buffing and polishing jobsOnly $74.99
20 different straight and curved edges for precise applicationOnly $4.99