Rapid Air Filter Regulator 3/4 in. Ports K93217

Rapid Air Filter Regulator with ¾-Inch Ports Cleaning up the air from your shop compressor is as simple as installing the Rapid Air K93217 filter/regulator. It's made for the M7580 MaxLine Master Kit with ¾-inch inlets that support airflow up to 300 CFM — more than enough to power industrial air systems. Dirt, dust and condensation are caught by a 5-micron filter. Use the manual drain to empty water before it builds up. An analog gauge and controls let you set the air pressure to anywhere between 0 and 150 PSI (the unit can handle 175 PSI).

The Rapid Air ¾-inch air compressor regulator and filter is exactly what automotive and agricultural shops need for their large-scale air tubing system. Installation takes only a few minutes when following the instructions in the video below. For best results, hang it on the wall nearest the compressor with the included mounting bracket. A one-year manufacturer's warranty and Eastwood's lifetime tech support mean you have someone to turn to if anything goes wrong.

Features:

• ¾-inch connector ports
• Max operating pressure: 175 PSI
• Set pressure to 0-150 PSI
• Max flow rate: 300 CFM
• 5-micron filter for dirt and dust
• Manual water drain
• 1-year manufacturer's warranty