Rapid Air Elbow Fitting 1/2 in. Tubing M8080

MaxLine 1/2" Compressed Air Elbow Fitting To plumb an automotive shop or factory, you'll likely need to span multiple walls and/or the ceiling. Instead of bending the air hose , connect two pieces using these 90-degree shop air line fittings for MaxLine ½-inch tubing. A compressed air system elbow fitting eliminates kinks without slowing down your air supply. Each push-to-connect fitting is made a nickel-plated solid brass that's rated for up to 175 PSI. The compression-style double O-ring holds the tubing in place with no clamps or glue — but you can still remove the hose if needed.

To link your MaxLine tubes, simply cut two pieces and insert them into either end of the Rapid Air M8080 elbow fitting. It can handle any type of corner — wall to wall, wall to floor or wall to ceiling. The easy but effective design of the MaxLine system allows DIYers to plumb their shop in a single afternoon. Plenty of other air management hardware is available from Eastwood with a 100% customer satisfaction guarantee.

Features:

• 90-degree elbow fitting
• Made for use with ½" MaxLine tubing
• Solid brass with nickel plating
• Double O-ring design
• Leak-free performance at up to 175 PSI (70 degrees)
• Push to connect
• 1-year manufacturer's warranty