
Details
Make sure your shop projects are powered by clean, dry air with this air compressor air filter designed for painting and powder coating. The Rockwood 3/8” NPT Air Filter/Dryer includes a high-capacity, drainable coalescing filter and bowl to trap moisture and other impurities from a compressed air supply. It filters down to 0.01 micron particles so air will be practically contaminant-free. The dryer section contains a replenish-able pellet-type of moisture-absorbing desiccant — two bags are included to get you started. There’s also an integral mounting bracket for secure mounting.
- Coalescing filter designed to remove oil, water, and particulates from air system
- Desiccant drier removes water vapor providing dry air to your system
- Wall Mountable
- Filters down to 0.01 Micron
High-quality air has a big effect on both results of a coating project and the lifespan of the tools used. A Rockwood air compressor filter/dryer for 3/8-inch inlets ensures your air management system will Do the Job Right. It can handle air pressures up to 150 PSI with a flow rate of 10.5-CFM for your toughest tasks. Visit the Eastwood Garage to learn more about this and other ways to keep compressed air clean in the shop.
Contents
Specifications
Air Inlet: | 3/8" FNPT |
Air Outlet: | 3/8" FNPT |
Service Pressure: | Maximum 150 PSI (10.4 bar) |
Service Temperature: | Maximum 125°F (52°C) |
Flow Rate: | 10.5 CFM |
Minimum Operating Air Pressure: | 20 PSI |
Safety
Read instructions thoroughly read and understand these product instructions before using this equipment. Failure to follow all warnings can result in tool damage or serious physical injury. Keep these product instructions for future reference.
Product Video
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
