Item #
11864ZP
BRAND: Eastwood
Eastwood Rubberized Rust Encapsulator Quart
Stays flexible as it stops rust in its tracks
Stays flexible as it stops rust in its tracks
Eastwood Rubberized Rust Encapsulator Quart is rated
out of
5 by
122.
Stays flexible as it stops rust in its tracks
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Product Overview:
Description
"Rubberized" Rust Encapsulator stays flexible as it stops rust in its tracks...outperforms standard undercoatings.
- Engineered with high-tech flex agents; less "rubber"
- Epoxy-fortified for better adhesion and durability
- Exceeded 1,000 hours of testing in a salt spray chamber
- Withstands up to 250°F
Eastwood's Rubberized Rust Encapsulator is the flexible version of our high-performance Rust Encapsulator coating that applies directly over rust or bare metal to provide long-term corrosion protection.
Warranty
In the Box
Contents
32 Fluid Ounces
Guides & Accessories
Safety Information
Always wear eye, skin and respiratory protection. Always apply in a well ventilated area away from open flame.
Accessories
20441 Undercoating Gun. 10041Z PRE Painting Prep. 13651 Z Rubberized Rust Encapsulator aerosol. 19867 Professional Undercoating Gun. 16017 ZP Heavy Duty Anti Rust Quart. 12515 Z Internal Frame Coating.12742 Z Flexible Sealer and Sound Deadener.
Application Tips
Apply with a brush or with an undercoating gun. Remove loose scale and rust. Apply directly over surface rust and bare metal to desired film build. Allow 24 hours for full cure for 68 degree F at 50 percent humidity. Thickness and weather conditions can affect dry times.
Reviews
Rated 5 out of
5
by
REMUMC from
Works even when 10 years old!
I used this on the outer inner fenders & the inner outer fenders on my 1965 Ranchero. I'll say this, I had a case that had been in my garage for at least 10 years, & every single can worked! It's easy to apply, has a good nozzle, & looks good. Only time will tell if it really encapsulates the rust.
Date published: 2024-02-09
Rated 5 out of
5
by
cd 7 from
best rubberized coating
better than other rubberized under coatings, sticks to virtually any surface, & lasts way longer.
Date published: 2023-08-09
Rated 5 out of
5
by
Les 22 from
Right the first time!
This is the right produce to give you the look.....but more importantly it gives you the confidence that the job was done correctly, and your project/investment will be protected in the future. Easy to use with great results
Date published: 2022-09-19
Rated 5 out of
5
by
Al Duke from
Great ease of use and Product
This product is awesome and easy to use.
Date published: 2022-01-25
Rated 5 out of
5
by
David from
Rust Encapsulator
Very nice product. Quality spray can and went on well to bottom of can with no waste. Set texture nice
Date published: 2021-11-05
Rated 5 out of
5
by
GBhonda from
Superior Product 5/5 no questions asked.
Top tier stuff! Once I discovered this it was like a secret of the universe found. Highly recommend. You will NOT be disappointed.
Has so many applications; just on the car alone...
Date published: 2021-09-27
Rated 5 out of
5
by
Anonymous from
Good Product
goes on well with good coverage. like that I can use the 24 inch extension to get it into areas the regular spray nozzle cannot get to .
Date published: 2021-08-26
Rated 5 out of
5
by
Pat M from
Great Product
Great product. applies nice and has a great feel to it.
Date published: 2021-08-12
Rated 5 out of
5
by
Domingo from
Great Product!
I have been using this product for many years, both spray can & brush on. Product works great, I brushed some on my battery compartment area and it stayed clean for 5 years before we sold the motorhome. Bought a new motorhome and using the product on the under carriage.
Date published: 2021-07-21
Rated 5 out of
5
by
jim 29 copo from
goes on nice be sure and follow instructions
this is the perfect color and finish for wheel wells
Date published: 2021-06-24
Rated 5 out of
5
by
Franz from
Very impressive
Painted under car in about 50 degree weather. It still dried fast no drips. I did prep the surface extremely well.
Date published: 2021-02-16
Rated 5 out of
5
by
Anonymous from
Applies evenly as a aerosil
I have purchased 6 cans to undercoat my Oldsmobile and it covers well
Date published: 2021-02-15
Rated 5 out of
5
by
Datawrangler from
Messy but tough as nails
Every surface on my 1966 Mustang which might get salt, water, rocks, asphalt, etc. is covered in this rubberized undercoating. I used 3 coats of Eastwood Epoxy Primer as the base and then sprayed the undercoating on top. I happened to drive through a gravel driveway of a gravel mining yard, and I got some water and gravel dust mix which kind of looked like concrete on the under side of my fender. It washed right off with the low pressure sprayer. Dirt and grime just don't stick to this stuff, and the rubberized texture flexes and repels rocks. It is highly recommended to protect your car's undercarriage from salt and rust.
Date published: 2020-03-04
Rated 5 out of
5
by
TonyD94 from
Great Finish
I used this product under the entire chassis of my Mustang. The underside was first degreased, wire brushed and lightly sanded before applying. This stuff has a really strong odor so make sure your work area is very well ventilated. It sprays on nice and smooth and it took about 10 spray cans to do 2-3 coats under the entire car. The spray mist is heavy and falls all over everything including yourself so be prepared for that.
Date published: 2019-06-02
Rated 5 out of
5
by
Robert from
Would buy again
Sprays on well covers nice heavier coat, have not been ob road so dont know how it handles rocks.
Date published: 2019-02-03
Rated 5 out of
5
by
Tommyd19 from
Great Results
I have used this product several times on several different builds, but more frequently on CJ series jeeps. Works very well all around especially in wheel wells.
Date published: 2019-01-25
Rated 5 out of
5
by
bigwheel from
Great Stuff..
I love this stuff. I pulled the carpets on my TJ and sprayed the floors front and back. Didn't have to wait overnight for it to dry which was nice and made the project quicker. Goes on nice and thick. Also did the undercarriage of Jeep. Im an older guy and the loud mufflers are passé for me and this stuff made the cabin nice and quiet inside like a luxury Jeep.LOL Beats the heck out of rust that's for shure..
Date published: 2018-07-28
Rated 5 out of
5
by
CarNutGuy from
Superb Product A+
Use the rust Encapsulator on my exhaust line and other parts under my truck after removing the rust via a soda blast. Looks brand new, and is holding up great. All autos should be treated with this prior to being sold or hitting the road for the first time. Thinking about using is now on my iron work railing that surrounds my deck. Read the instructions and you will have awesome results!
Date published: 2018-01-19
Rated 5 out of
5
by
Jimmer from
Better in this can thru an undercoating spray gun
You'll find you use more product, but thru a spray gun you can apply it more accurately. I did do an area with a brush as well, which was very time consuming but you can reach places a gun with an airline attached can't reach. All stating the obvious here but that said I think this is better than the spray can.
I have used 2 cases of spray cans and got them on a "deal day" as it was called...
I feel it was too thin using the spray cans and required several coats. Using Eastwood's Undercoat Spray Gun, I got just the right amount of product applied in one round, much quicker! You might spend a bit more this way, but you will get superior results.
Date published: 2017-12-12
Rated 5 out of
5
by
Boom Boom from
works but only as good as you prep the rust
I have done a 13 year old F150 and a 13 year old Land Rover with this product. Prior to spraying I converted most of the rust with Corroseal. I had to wire brush extensively and even cut out some frame rust. I also blew air into the frame before internally coating. I did three coats and used about 3 cans for each vehicle. If prepped properly it dries hard and does not come off easily. After two years some spots came back that were not prepped well. I used the same method and it is now holding after three years. Cannot complain for what I paid along with the effort applied. I also will be applying NH Oil over this each fall as the magnesium chloride used on our roads is extremely invasive.
Date published: 2017-10-01
Rated 5 out of
5
by
Boileral from
Great product
Great coverage, strong material. Took a while to dry even low humidity
Date published: 2017-07-26
Rated 5 out of
5
by
ken50 from
very good product
best i ever used would recommend to every one how asked about this product.
Date published: 2017-07-06
Rated 5 out of
5
by
Matt D from
As advertised
2001 F250 in the Northeast used as service & plow truck. Frame and Cab have the 17 years of rust and corrosion expected, no rust through in body. Surface rust on frame easily removed. & this product in aerosol does exactly what it says pinpoint accuracy without hitting exhaust pipes. Zero clumping or bubbling. Zero overspray. Video is accurate and this product is reliable. 10 cans bought 9 cans in, and I have the entire frame, entire cab floor,8ft bed along with wheel wells and fisher plow frame mount completed to MY satisfaction. Do it yourself or don't bother. I have read some negatives on coverage and elasticity. I dont believe that. shake the can and follow direction. then shake some more. there is a noticeable feel to the can when it has been mixed properly. I got 99% of product out of those spray cans, without any nozzle clogging. Failure to have common sense or follow MFG minimum directions is your own fault. I may have only finished this undercoat an hour ago. But I am extremely confident in its quality.
Date published: 2017-05-10
Rated 5 out of
5
by
Dannyv from
Excellent product
This is what I've always been looking for! It works like it says.
Date published: 2016-09-23
Rated 5 out of
5
by
Dons 41 from
Best there is.
I used my rustproofing gun. It went on great and looks perfect.
Date published: 2016-08-31
Rated 5 out of
5
by
Posel5880 from
Excellent finish
Goes on easy and covers well. Once dry it looks perfect.
Date published: 2016-08-29
Rated 5 out of
5
by
The chicken Farmer from
Works as advertised
Its been 4 months and still looks as good as the day I put it on.
Date published: 2016-08-02
Rated 5 out of
5
by
MISSUNG from
NICE TO USE AND EASY
WHEN ON GREAT AND JUST LIKE I HOPED NICE WORK IN THE WAY I GOES ON
Date published: 2016-06-27
Rated 5 out of
5
by
johnr from
Wonderful Protection
I use this to seal areas that are hard to get to for corrosion removal. It is an awesome fist two layers for undercoated areas. It is easy to use and has wonderful adhesion properties on properly prepared surfaces.
Date published: 2015-12-15
Rated 5 out of
5
by
jc 04 ranger from
Rubberized rust encapsulator
So far so good! Bought more to do entire frame! Only time will tell!
Date published: 2015-11-17
Questions & Answers
Could you spray this over old bed liner?
As long as the old bed liner is scuffed up and wiped clean this can be applied over it.
Date published: 2024-07-21
Can this be used on top of POR15? Someone sprayed the bottom of my truck I recently purchased and the por15 is crumbling away and I'd rather try to fix the rust & clean that's reappearing before it gets worse.
Yes you can spray over Por-15 after wire brushing all loose flaking and rust and cleaning with a good sovent such as Eastwood's Pre Painting Pre(100441Z)
Date published: 2021-02-08
Ive read this cannot be applied over self etching primer, but could i spray this over areas i have used your fast etch product on?
Yes, Eastwood Fast Etch(19416) will leave a invisible Zinc Phosphate coating on the steel that can be painted over. Just wipe the surface with Eastwood Pre Painting Prep (10041Z) before spraying.
Date published: 2021-01-11
If I apply this over the rust encapsulator paint, do I still need to scuff the surface or no because it is a matte?
You will not need to scuff the surface to apply the rubberized rust encasolator.
Date published: 2021-04-25
Can I spray the 2k epoxy primer over clean metal and then the rubberized encapsulator over that for a top final coat? I do have chassis black as well but I seen its not recommended to spray chassis black over the rubberized am I correct?
The rubberized encapsulator would have to go on top of the epoxy primer. The rubberized version would not be able to be top coated with anything.
Date published: 2020-04-19
Can I apply this product over 'Self Etching Primer'?
This product can't be applied over self etching primer.
Date published: 2022-08-26
I've heard horror stories about rubberized undercoatings done professionally by Ziebart and also DIY jobs done with "off the shelf" rubberized undercoatings causing the under side of a vehicle to rust out faster than normal. Can that occur with this stuff
As long as the surface is dry when applied the encapsulator in the undercoating will seal the bare metal from any kind of moisture which can be trapped in with the usage of non-rust encapsulator based rubberized undercoatings.
Date published: 2019-09-16
Can the rubberized rust encapsulator (spray can or 1 quart can) be applied directly to Eastwood seam sealer, or does the seam sealer need to be primed first?
This product can be applied directly over the seam sealer.
Date published: 2019-09-04
Any suggestions on how to keep clearing the nozzle when using the spray can version? This is highly frustrating. I'm constantly shaking the can and removing the spray nozzle in attempt of being able to use this product. Help!
We have a product specifically designed to make cleaning out such nozzles extremely easy. Here is a link to this item on our website: https://www.eastwood.com/aerosol-injected-cleaner-11-oz-net.html
Date published: 2019-10-09
How does one remove rubberized rust encapsulator down to clean metal?? I am prepping a small area for welding.
You would really need to use a heat gun and a metal scrapper. Chemical strippers might add in softening the material for easier removal as well.
Date published: 2019-07-09
I've recently sprayed this and it has reacted strangely with some of the original undercoating. It has been 2 weeks and these areas have not dried and remain extremely tacky - easily coming off on your fingers. Any way to promote hardening at this point?
No at this point these coatings would need to be removed.
Date published: 2019-07-01
The rust encapsulator udercoating. Can it be applied over the new rust encapsulator platinum
The undercoating can be applied over the platinum encapsulator.
Date published: 2020-07-11
will I have to remove all of the old under-coating that was applied years ago?
You can simply scuff the old undercoating and clean it then apply the new one over it.
Date published: 2023-02-20
Would this be good to use on a flatbed it has some rust areas and i will sandblast some spots before I paint
This can certainly be used for this type of application. You firstly want to remove as much of any lose or scaling rust as you can. If there is any existing finish in good condition- scuff it with a red/maroon scuff pad (or 400-600 grit paper). Next clean and de-grease the surface with PRE painting prep. You can then spray this Rubberized Rust Encapsulator over everything. Because this dries to be a rubberized finish- it remains semi flexible.
Date published: 2018-12-30
If I use rubberized rust encapsulator on the underside of my wheel wells, can I then apply an oil based rustproofing/undercoating over it without causing the rubberized rust encapsulator to fail?
We can only guarantee compatability with what we sell. Once fully cured, this Rubberized coating can be top coated with our Heavy Duty Anti- Rust for example: https://www.eastwood.com/eastwood-heavy-duty-anti-rust-in-black.html
Date published: 2019-05-04
Scott C says 10 SF, KHofnagel says 25 -30 SF is the coverage a quart provides, both on your staff, which is accurate. Careful reading of your info often uncovers contradictions... Please advise
We apologize for the confusion. The quart is 25-30 sq ft. The 10 I was referring to was for an aerosol.
Date published: 2019-10-22
I have an 09 F150 that has rust in the rocker panels. Once I remove as much loose rust as I can and sand down any rough edges, can the rubberized rust encapsulator then be sprayed directly onto the panels?
You will want to wipe down the panel with a wax and grease remover it then can be sprayed directly onto the panel.
Date published: 2019-02-02
I’ve noticed some rust buildup inside the fender wells and it seems to be spreading towards the outer side of the fenders. Would this help prevent it from spreading anymore?
Our Rubberized Rust Encapsulator is a great way to stop the spread of surface rust in wheel wells.
Date published: 2018-12-30
I ordered a 2018 ford Raptor. Once it comes in I would like to undercoat the truck to protect from rust. Would the rubberized rust encapsulator undercoating be the recommendation along with internal frame coating for a new truck?
Since it is a brand new vehicle our Heavy Duty Anti rust would be perfect in areas such as frame rails and our Rubberized Undercoating would be perfect for areas you wish to have extra chip protection.
Date published: 2018-12-30
I want to use this stuff on my rocker panels,clean the small rust spots and treat with the PRE and do the whole rocker with this.My question is can this be used on painted surfaces or does it have to be bare metal?What steps of preparation do I need to do
The Rust Encapsulator products can be applied over bare metal, rusted metal, and over existing paint. You simply need to wire brush the area first, clean with our Pre Paint prep, and then spray.
Date published: 2018-10-24
After I clean my underbody and apply rubberized rust encapsulation can I apply more coats over this with the plain rubberized undercoat for more sound deadening and protection from elements ?
Based on your plan it would actually be better to use the non rubberized Encapsulator and then apply the Rubberized Undercoating over top of that as you please.
Date published: 2018-10-24
How many cans of this would I need to do a good full job undercoating an old 95 Jeep YJ ? Thanks
The only way for us to estimate how much you will need is to tell you each can covers approximately 10 SQ FT.
Date published: 2018-05-21
can i apply this over spray on rust converter
Yes, this can be applied over top of the Rust Converter.
Date published: 2018-10-24
Can this be used on the interior. Like the floor of the cab.
As long as it is not applied to areas in which you walk on you would be fine. Or if you place it under carpeting you would be perfectly fine to use on the interior.
Date published: 2018-10-24
I have a 2006 Ford superduty and the frame still has a lot of intact factory-applied coating (a black waxy coating. maybe cosmoline?) but also a lot of spots with rust. Can this product be applied over the existing frame coating?
The wax/oil based coating that is down will need to be removed before you can apply this coating over.
Date published: 2018-10-24
What is the coverage on the Quart?
A quart will cover about 25-30 sq. ft in one coat,
Date published: 2018-10-24
I used chassis Black and I'm not happy with the finish could I spray the Rubberized coating over the top with out sanding or scuffing the surface.
You will need to scuff the surface first with at least a Red Scuff pad prior to using a rubberized undercoating. This will ensure a good mechanical bond.
Date published: 2018-05-21
What kind of paint can I topcoat the rubberized encapsulator with
We do not recommend painting over the rubberized Rust Encapsulator.
Date published: 2019-01-22
Would this product work well on hood hinge springs? I'm concerned that everything else will crack. I planned to spray this while the hinges are attached and the hood is open (springs stretched).
That much movement would more than likely cause the paint to fail prematurely.
Date published: 2017-06-06
Can i put chassis black satin underbody coating over rubberized rust encapsulator?
You do not want to topcoat a rubberized paint with a standard paint. Rubberized undercoating remains semi flexible. Applying a hard finished paint over top would cause the topcoat to crack and peel of when the undercoating below flexes.
Date published: 2018-05-15

We found other products you might like!
Eastwood Rubberized Rust Encapsulator Quart
$49.99
In Stock