90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
Stop rust in its tracks! Our Rust Encapsulator (White) has been formulated with SUPERIOR corrosion resistance to "hardware store rust paints"!
You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
Q: Can Rust Encapsulator be applied with the Undercoating System?
A: Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy-Duty Anti-Rust (16017ZP). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.
Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposits. Shake can for at least 2 mins after mixing ball starts to rattle.Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulator can 10 to 12 inches from surface. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3 to 4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6 to 8 hours after last coat before applying top coat.
always wear eye, skin and respirtaory protection. Apply in a well ventilated area away from open flame.
To get $10 OFF your order!