Item # 11449Z BRAND: SEM

SEM Color Coat Flexible Coating Landau Black Interior Paint

UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats
UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats
SEM Color Coat Flexible Coating Landau Black Interior Paint is rated 4.6 out of 5 by 22.
  • y_2021, m_11, d_30, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_11449Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 94.05ms
  • REVIEWS, PRODUCT
$15.99
Loading...
Save for Later
UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats
  • 90-Day Returns
  • Technical Support
SEM Color Coat Flexible Coating Landau Black Interior Paint

Description

Color Coat™ is a specialty flexible coating formulated to restore or change the color of most vinyl surfaces, flexible and rigid plastics, carpet and velour. Color Coat is not a dye, but a fade resistant flexible and permanent coating.

  • OEM Recommended
  • Refinish vehicle interiors and motorcycle seats
  • Enhance automotive carpet and velour
  • Superior adhesion, flexibility, and hiding
  • Will not crack
  • Quick drying and simple to use

Renew or change the color of vinyl, leather, and plastic automotive interior and vinyl tops. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. Colors shown are approximate.

Specifications

• 16 oz. Aerosol containers
• Coverage: 10 sq. ft.

Suitable Substrates

• Vinyl
• Plastic
• Carpet
• Velour
• Properly prepped and primed metal

Warranty

Made in USA

Contents

Aerosol net weight 12oz

Accessories

SEM Plastic Adhesion Promoter
SEM Plastic and Leather Prep

SEM Titanium Metallic SEM Cordovan Brown SEM Black SEM Palomino SEM Landau Black SEM Shadow Blue SEM Camel SEM Burgundy SEM Light Buckskin SEM Firethorn Red SEM Portola Red SEM Super White SEM White SEM Napa Red

Application Tips

For best results, use when can is 70°F. Clean surface with warm soap and water. Ensure surface is dry before painting. Hold can approximately 6-8” from the surface to be coated. Apply light “mist” coats allowing 5-10 minutes between coats. Several thin coats give a better finish than one heavy coat. Carpet and Velour: Spray one light mist coat and immediately brush in all all directions using a nylon bristle brush. Apply a second light mist coat and brush again.

Safety Information

Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area away from open flame.

Customer Reviews

Rated 5 out of 5 by from Worked Great! Have used Eastwoods vinyl and plastic paints to change, or brighten existing interior components and have never been disappointed. I use the plastic promoter and all goes well. The can doesn't list dry times, or much else relative to using this product. Kinda makes you feel a little leery - but it worked out fine. Seems to stand up to medium use well. Used it on interior plastic, not the seats - where the wear is much harder. Flows on and covers well. Use light coats when spraying. Parts held vertically have a tendency to run, unless the coats are thin and dry time of at least an hour is adhered to between coats. Spray at temp of 70º or higher.
Date published: 2016-01-21
Rated 5 out of 5 by from Good Product This does a nice job of covering what I wanted. Looks very nice.
Date published: 2015-06-30
Rated 5 out of 5 by from Renewd Sportster I had two pinholes, seat and backrest, on my Sportster that were barely noticeable, but as my girlfriend says.........I'm a fanatic. Repaired them both, results were great, but.......I go on your sight frequently, and glad I did. The results were terrific, better than new!
Date published: 2015-05-04
Rated 5 out of 5 by from worked great repaired my 1970 torino dashcover and coated it with this afterwards, looks awesome and really stuck good, just clean it and scuff it down as suggested!
Date published: 2015-03-06
Rated 5 out of 5 by from Love this stuff!! Did the entire interior on my 67 GTO, I love it. Went from white and red to black. I cannot believe the results. Looks like it always was black. Once you complete the dyeing just let it cured for a day or so before using. Very easy to use, just do light coats and you are good.
Date published: 2014-12-29
Rated 5 out of 5 by from Works great I used this product to refinish the interior plastic and vinyl in my Datsun 280Z project. I used the vinyl prep on the flexible vinyl and the adhesion enhancer on the hard plastic parts. The interior parts look like new and seem to be holding up well.
Date published: 2014-02-17
Rated 5 out of 5 by from Eastwoods tech staff steers me right... I am restoring a '84 with black plastic bumpers. They were heavily weathered and I wanted them to look like they did in '84,, not just painted. This product with the suggested plastic adhesion promoter gave me perfect results. My local body supply had other ideas, but Eastwoods tech staff hit it right on the nose.
Date published: 2013-11-05
Rated 5 out of 5 by from excellent product This is my second purchase of this product. First I refinished my leather steering wheel from my 1981 Fiat Spider. Next I refinished my new dash that had a terrible finish. Now it looks like factory new. Absolutely the best product for these jobs. I gave my Brother-in-Law a little of the paint and he quickly bought more and refinished the leather interior in his 1937 Chevy Street Rod. You have two dedicated customers. I would recommend this to anybody.
Date published: 2013-06-03
Rated 5 out of 5 by from PRODUCT WORKED GREAT!!!!!! I was doing a complete color change on my 84 Corvette from grey to black. I wasn't sure I could do it myself so I sent some of the parts out to the professional shop. I used the Landau Black Interior Paint with the 52366Z SEM Plastic Adhesion Promoter on the parts I did. To my surprise the parts from the shop showed sections of peeling and flaking within 2 weeks. The parts I did turned out GREAT!!! The color is a nice RICH black that looks like it came from the factory!!! No peeling flaking or rubbing off. Prep work was key. I took my time and made sure all surfaces were clean before applying any products and wiped them down w/isopryl alcohol before using the Plastic Adhesion Promoter. I also applied 3-4 light coats rather than one heavy coat. BOTH PRODUCTS WORKED GREAT AND EXCEEDED EXPECTATIONS!!!!!!! I think I'll be redoing the parts I got back from the shop next :)
Date published: 2012-04-21
Rated 5 out of 5 by from Product Worked GREAT!!!! I was doing a complete color change on my 84 Corvette from grey to black. I wasn't sure I could do it myself so I sent some of the parts out to the professional shop. I used the Landau Black Interior Paint with the 52366Z SEM Plastic Adhesion Promoter on the parts I did. To my surprise the parts from the shop showed sections of peeling and flaking within 2 weeks. The parts I did turned out GREAT!!! The color is a nice RICH black that looks like it came from the factory!!! No peeling flaking or rubbing off. Prep work was key. I took my time and made sure all surfaces were clean before applying any products and wiped them down w/isopryl alcohol before using the Plastic Adhesion Promoter. I also applied 3-4 light coats rather than one heavy coat. BOTH PRODUCTS WORKED GREAT AND EXCEEDED EXPECTATIONS!!!!!!! I think I'll be redoing the parts I got back from the shop next :)
Date published: 2012-04-21
Rated 5 out of 5 by from Great value for the buck I used the product on hard and one piece of soft vinyl and its holding up great
Date published: 2011-01-23
Rated 5 out of 5 by from Great suff came out great , would buy it agian
Date published: 2010-05-26
Rated 5 out of 5 by from Great Stuff I first use Lacquer Thinner to clean and soften the vinyl - then it's a great long lasting finish, and covers well. Absolutely the best carpet dye around - use scrub brush in many directions while spraying to keep the dye and carpet fibers from sticking together. I dyed some light blue carpet to black several years ago and it still looks factory today - great stuff.
Date published: 2010-03-16
Rated 4 out of 5 by from Great stuff - wish it came in a quart I love this stuff so much I should marry it. It works just as good as I could ever hope. See the attached photos of a seat and door panels I changed from tan to black. I also love the Eastwood customer support - everything I could ask for. And this is where the four stars come in, instead of five. The aerosol cans kind of stink. I could get about half of it sprayed out before the cans just quit (two different cans). I could feel that it was only about half used. I called Eastwood and they sent me a new can, which was great, but it'd be better if they sold it in quarts like they do n Amazon...
Date published: 2017-02-15
Rated 4 out of 5 by from seems a lot better than the other one u sell i bou lot better than the other one you sell I bought 5 or six cans of it but it rubs right off
Date published: 2015-05-27
Rated 4 out of 5 by from Great results I used this paint (and the plastic adhesion promoter) on original dash knobs from my '72 Land Cruiser. They look new! A nice satin finish. I don't know about durability, yet, but the finish is better than the reproductions which are VERY shiny. Good stuff.
Date published: 2014-01-10
Rated 4 out of 5 by from Excellent finish I am very impressed with the look of this paint. It has brought back my 1969 buick parchment vinyl to look almost new. Just be sure to spray when the temperature is above 70° as recommended. I tried when it was cooler (Chicago "spring" weather) and the paint splatteresd a bit. Sprays nice when temperature is correct.
Date published: 2013-05-17
Rated 3 out of 5 by from Cracking I cleaned and sprayed two new sun visors. Both looked great until you squeezed or poked at them. Flexible material cracked. Not sure how or where to go from here.
Date published: 2016-08-13
Rated 3 out of 5 by from Good, but not great! Covers well, and goes on very even. Color match is good, but it seemed to adhere to flexible surfaces better than hard surfaces. For example the sunvisors & arm rest pads were great, very durable. But on the dashboard (70s Ford hard plastic) it scratched off very easily. It's easy to retouch, but this was after the parts had been thoroughly cleaned, dried & sprayed with adhesion promoter. A little disappointing given the price including postage.
Date published: 2010-08-16
  • y_2021, m_11, d_30, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_11449Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 45.97ms
  • REVIEWS, PRODUCT

Questions & Answers

i would like to purchase this product to brighten up the color of my convertible top. how many cans would i need to do so 

Asked by: Motorcity_Mike
Each spray can will cover about 6 SQ FT.
Answered by: S Church
Date published: 2017-03-09

Will this paint adhere to metal or hard plastics?

Asked by: Astro
This product can certainly adhere to properly prepped hard plastic or metal surfaces.
Answered by: S Church
Date published: 2018-06-15

Hello, Will this work on a vinyl headliner on a 1969 Mustang? want to go from blue to black.

Asked by: dragracer302
Yes you can use this as long as you use a vinyl prep first: http://www.eastwood.com/vinyl-prep-aerosol-14-09-net.html.
Answered by: KHoffnagle
Date published: 2017-09-17

Does this product work on fabric seats? Also fabric on doors and Capet?

Asked by: Alexx123
This is not intended for use on Fabric.
Answered by: KHoffnagle
Date published: 2017-09-17

how much does one can cover? one seat?, half a seat, the whole interior? thank you

Asked by: frankiebones
One can covers 6 sqft. Which would equate out to 1-2 seats.
Answered by: SeanA
Date published: 2017-09-17

Hi, is this product recommended to paint my sun visors?

Asked by: alexis27
I have used this product to change the color of my white vinyl sun visors to black in my VW Beetle. Make sure you use Vinyl Prep before applying. http://www.eastwood.com/vinyl-prep-aerosol-14-09-net.html
Answered by: NickC
Date published: 2017-09-17

Hello can this product be used to coat hot tub pool headrests that have been bleached out by chlorine and the sun and do you have a distributor in Canada?

Asked by: Northern Kokanee
  • y_2021, m_12, d_1, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_11449Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 103.8ms
  • QUESTIONS, PRODUCT
We found other products you might like!
SEM Color Coat Flexible Coating Landau Black Interior Paint
$15.99
In Stock