UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
Color Coat™ is a specialty flexible coating formulated to restore or change the color of most vinyl surfaces, flexible and rigid plastics, carpet and velour. Color Coat is not a dye, but a fade resistant flexible and permanent coating.
OEM Recommended
Refinish vehicle interiors and motorcycle seats
Enhance automotive carpet and velour
Superior adhesion, flexibility, and hiding
Will not crack
Quick drying and simple to use
Renew or change the color of vinyl, leather, and plastic automotive interior and vinyl tops. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. Colors shown are approximate.
For best results, use when can is 70°F. Clean surface with warm soap and water. Ensure surface is dry before painting. Hold can approximately 6-8†from the surface to be coated. Apply light “mist†coats allowing 5-10 minutes between coats. Several thin coats give a better finish than one heavy coat. Carpet and Velour: Spray one light mist coat and immediately brush in all all directions using a nylon bristle brush. Apply a second light mist coat and brush again.
Rated 5 out of
5 by
90 GT from
Made the seats look almost new again.2 1/2 cans later , the 2 front bucket seats and the rear seat in the 90 Mustang GT look 100 % better. The seats were already white, just showing age but no rips. Just used a scotchbrite "red" pad and hot/soapy water and cleaned thoroughly, then wax and grease remover, wiped with a dry cloth. Then thin coats and a final medium coat. total of 3-4 coats for coverage. No disappointments so far.
Date published: 2015-12-22
Rated 5 out of
5 by
dlynne from
GreatI bought this for my boat seats, they were in good condition, but had turned yellow or stained looking. this made them look new again
Date published: 2015-04-10
Rated 5 out of
5 by
Anonymous from
PositiveI just recently used this product to recolor the rear seat in my 1968 Satellite. I changed the color from blue to this white. One can per top and one for the bottom seat were needed, however I was covering a dark color. I also used the adhesion promoter that Eastwood offers for this project as I wanted every opportunity for succes. Coverage and adhesion are very good. The finish is smooth and pliable. Time will tell if it holds up to someones rear sliding across the seat, but first impressions are very positve.
This product is designed to coat vinyl, leather, and plastic automotive interior and vinyl tops. So depending on the material of your headliner, this should work for certain applications.
Answered by: ZachC
Date published: 2022-03-02
Can you use it on metal? I'm wanting to spray my steering wheel, but I want my column to match. 1962 C10
Asked by: TimB
The SEM Color Coat Flexible Coating Interior Paint (11438z) is not rated for painting metal parts.
Answered by: vince
Date published: 2020-12-29
Will this work on cloth seats
Asked by: Jimbo
Dyes work best for cloth applications. We would not recommend utilizing this on cloth material.
Answered by: Kelly H
Date published: 2020-06-27
Is this gloss or matte?
Asked by: Joseph
This product has a Semi Gloss finish.
Answered by: Bob G
Date published: 2018-12-27
Will this paint work on a vinyl tonneau cover?
Asked by: Rocspec
This paint can be applied to a tonneau cover, you will just want to ensure the vinyl is extremely clean.
Answered by: SeanW
Date published: 2018-10-02
I am looking for a cream or ivory color. you state that other colors a available.
do not need aerosol can just paint is ok.
vic
Asked by: vick
The only color options we sell and sizes are listed on our website. We do not carry any alternate options other than these aerosols.
Answered by: Kelly H
Date published: 2018-07-12
Is this the same product as SEM color coat?
Asked by: Daveiii
Yes, these are the SEM interior paints.
Answered by: KHoffnagle
Date published: 2017-06-05
Do you use a primer with the white Interior paint when painting a seat?
Asked by: wxxo
You would want to first use either the Plastic and leather prep:http://www.eastwood.com/vinylcoat-plastic-prep-aerosol-11-25-net.html or the vinyl prep:http://www.eastwood.com/vinyl-prep-aerosol-14-09-net.html.
