- Soda Blast Intro Blast out of Bucket Gun and Media
Soda Blast Intro Blast out of Bucket Gun and Media
Item #13943 Soda Blast Intro Kit
About Soda Blast Intro Blast out of Bucket Gun and Media
Try out soda blasting without a large initial investment with our blast out of a bucket gun and 10lbs of media. Just connect the gun to your 7 cfm at 80 psi compressor put on appropriate protection and put the pickup tube in the included bottle of soda blast media.The Suction head draws the soda into the air stream to minimize surging or skipping and accelerates the media at your part. Trigger action lets you blast when and where you want. The Maintenance M Soda Media is great for removingpaint, carbon, and other coatings.
Blast out of a bucket kit contains:
(1) Blast Gun Assembly (2.5mm I.D. Air Jet and 4mm Nozzle installed)
(1) Double Pick Up Tube
(1) 5' [1.5m] x 1/2" [12.7mm] I.D. Reinforced Suction Hose
(3) 0.16" [4mm I.D.] Ceramic Nozzles (requires 7 CFM at 90 PSI)
(1) 0.10" [2.5mm I.D.] Replacement Air Jet (requires 7 CFM at 90 PSI)
(1) 1/4" MNPT Quick Disconnect Air Fitting
Abrasive Blasting Hood is not included.
13779 - 40/70 Ground Glass Media - 50LBS
13779 10LBS - 40/70 Ground Glass Media - 10LBS
11806 10LBS - Maintenance M Soda Media - 10LBS
11806 - Maintenance M Soda Media - 50LBS
22095 - Deluxe Blast Hood
22044 - Replacement Nozzle Set, Steel
22043 - Replacement Nozzle Set, Ceramic
Use a properly fitted dust mask or respirator, safety glasses or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Make sure the deadman valve is operating properly by depressing the valve lever and releasing; the nozzle should close under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.
Questions & Answers
Customers also viewed:
Switch "on the fly" between soda and abrasive media...or combine!
100-lb. blaster has large, high-flow valves to speed rust/paint removal
Protect your eyes, face from "rebounding" abrasives
Easily handles "spot" rust-removal jobs...just attach a home compressor