(Q) What will soda abrasive remove?
(A) Removes urethane, epoxies, enamels and lacquer top coats along with virtually every primer for automotive and marine use. Also strips coatings from fiberglass on vehicles and boats

170-micron 100 grit size "Moisture guard" additive eliminates the clumping and sporadic flow typical of competitors’ products. Use this media for removal of old enamels and lacquer coatings.

Use with 50096 110-lb. Soda Blaster or our 50095 Soda Blaster. The soda media will remove urethane, epoxies, enamels and lacquer top coats, along with virtually every primer for automotive and marine use. Use soda to strip coatings from fiberglass from auto and boats, and even blast and prep wheels for paint without dismounting the tire! Note: Soda alone will not remove rust. You will need to use our abrasive medias for heavy rust removal.

Use a properly fitted dust mask or respirator, safety glasses or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Get our 50097 Soda-Blasting Protection Kit for complete protection. Make sure the deadman valve is operating properly by depressing the valve lever and releasing; the nozzle should close under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired. 50417 Galvanized Abrasive Media Funnel Strainer