Item # 31041 BRAND: Motor Guard

Stud Welder Dent Pulling System

Spot-weld the pins, pull pins to pull-out dent, snip and grind them down
Spot-weld the pins, pull pins to pull-out dent, snip and grind them down
Stud Welder Dent Pulling System is rated 4.3 out of 5 by 12.
  • y_2021, m_9, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_1, tr_11
  • loc_en_US, sid_31041, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 104.74ms
  • REVIEWS, PRODUCT
$249.99
Loading...
Out Of Stock. Due back November 16
Save for Later
Spot-weld the pins, pull pins to pull-out dent, snip and grind them down
  • 90-Day Returns
  • Technical Support
Stud Welder Dent Pulling System

Description

Stud Welder Dent-Pulling System makes a hole-free dent repair, so it won’t weaken the panel, and needs less filler.

  • Stud welder spot-welds pins onto the dented metal surface
  • Pull the pins to pull-out the dent
  • Snip the pins, then grind the rest down

3-step repair works without drilling holes, so it won't compromise the strength of the panel. The result is a professional-looking dent repair that requires minimal filler.

Contents

Stud Welder Kit includes the 110v self-contained stud gun, large slide hammer puller with 2-lb. sliding weight, pack of 100 draw pins (2mm), and an instruction manual.

FAQs

(Q) Do I need a 220-volt system to operate this?
(A) No, standard 110v will work.

(Q) Do I need a welding mask when using this?
(A) It’s not necessary, but don’t look directly into the momentary flash.

(Q) How do I get the pins off after they’ve been welded onto the surface?
(A) After you’ve made your pulls, simply snip or grind the pins off.

Accessories

The Shrinking Electrode Tip (31041 A) turns your stud Welder into an effective tool for shrinking metal. Simply install the shrinking electrode, push the tip fully against the raised spot and trigger the gun for 1/2 second 2-3 times. If dent does not shrink tap lightly with a body hammer.

Application Tips

The Stud Welder Dent Pulling System makes pulling dents from one side possible without drilling holes! The Stud Welder Kit includes: the Stud Welder Gun, Large Slide Hammer Puller with 2 lb sliding weight, and a package of 100 2mm Draw Pins. Easy to use, simply grind away paint in damaged area, load draw pin into gun, push spring loaded stud weld gun against surface until outer contact ring touches surface, and trigger gun for less than a second to anchor the pin.

Safety Information

Stray sparks normally occur during use of this tool. Therefore, keep all flammables out of the immediate area.

Customer Reviews

Rated 5 out of 5 by from Great products I haven't used my stud puller yet but it's a Eastwood product everything else I have bought from Eastwood has been perfect so I'm not worried about this product
Date published: 2016-02-17
Rated 5 out of 5 by from Works just as advertised Works great. Will pay for itself in time saved just on one restoration project. Wish I bought this two projects ago.
Date published: 2015-12-13
Rated 5 out of 5 by from Works very well. Another good tool from Eastwood! Works fast and the studs arewell fastened . I can pull dents that otherwise would require major surgery to access the back side of them. Work just like it is suppose to.
Date published: 2010-02-23
Rated 5 out of 5 by from Stud welder dent puller saves the day!! The recently purchased stud welder dent puller I purchased from eastwood, saved me time and unecessary damages to, alot of my customers, vehicles,and it has almost tripled my,business. I document all of my Repairs, with photographs, and when, customers or future customers see my work, and the products I use, from Eastwood, They highly recommend my company because of these, certain products, that are professionally used by myself, on their vehicles. Thanks Eastwood
Date published: 2010-01-27
Rated 4 out of 5 by from Great tool Got the tool all good but the cam on slid hammer is hard to undo but still working with it and y’all have blowed my phone up with emails like to have one of everything but have to buy one at a time ease up on emails little bit
Date published: 2019-02-06
Rated 4 out of 5 by from Used for installing window trim rivets Have not used the "dent pulling" part of this yet. I used it to install window trim rivets on my 69 Camaro. I was able to get it to work, although the grounding portion of it is quite large, which makes it difficult to fit in the confines of many early window frames/channels. I don't see the need for the grounding area to be as big around as it is. If it was about 25% smaller it would have been perfect. As far as price, I could have probably gotten this cheaper. I'm sure it is essentially a re-branded standard issue spot welder. Quality seems good (made in USA!! )
Date published: 2013-04-03
Rated 3 out of 5 by from Unit A-OK Help- Metal will not budge. Maybe 80yr old is not strong enough on the hammer?
Date published: 2013-12-29
Rated 1 out of 5 by from Worked well, until I list the tip! Unit worked great. Lost the tip that falls out easily. No problem, I thought, until I tried to buy a new tip, which is not sold. Now the stud welder is worthless. Can't use it at all!
Date published: 2017-12-28
  • y_2021, m_9, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_1, tr_11
  • loc_en_US, sid_31041, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 40.21ms
  • REVIEWS, PRODUCT

Questions & Answers

will it bond to stainless steal

Asked by: Alfred Corrales jr
Unfortunately these will not weld properly and bond to stainless steel.
Answered by: Scott C
Date published: 2020-12-15

will this machine weld the trim rivets you have and will i need to buy the separate attachment

Asked by: Edmo
A separate trim welding tip would be required.
Answered by: Scott C
Date published: 2020-05-25

will this unit work in Australia with 240v

Asked by: Edmo
This unit will not run on 240V
Answered by: Scott C
Date published: 2018-12-29

do you just plug on the outlet?

Asked by: iLuvFartCan
This tool plugs into a standard 120v outlet.
Answered by: Scott C
Date published: 2019-07-25

Are replacement tips available? We've lost the tip and can't use this now until we find a replacement tip. Also does the standard tip work from 2.0mm to 2.5mm pins?

Asked by: Nikolas
We do not currently offer any replacement parts for these units.
Answered by: Scott C
Date published: 2019-01-25

What is the amp rating of this and simliar units. I am in Australia and would use an power invertor to use it. The invertor would supply 240 volt down to 120 volt with the US female outlet to suit the plug.

Asked by: Suzy
This unit runs 120v @ 15 Amps.
Answered by: S Church
Date published: 2017-08-24

Can this be used to pull out dents in aluminum?

Asked by: nathan15
This will not work on aluminum.
Answered by: S Church
Date published: 2019-06-23

will this work on the 240v system in the uk, I realise I will have to replace the plug to make it compatible for a uk socket

Asked by: neat pete
This is a 120 Volt only unit.
Answered by: S Church
Date published: 2016-07-26

What is the duty cycle on this stud welder?

Asked by: SStafford1971
The stud welders are not rated with a duty cycle like a traditional welder since they are never operated continuously. These are triggered on and off quickly when used.
Answered by: S Church
Date published: 2019-11-10

would you recommend using this for hail dents on a mid 70's domestic car?

Asked by: hardwood
This stud welder would be great for pulling hail dents.
Answered by: S Church
Date published: 2018-08-10

Does this come with a slide hammer? 

Asked by: TJ McCauley
Yes this comes with a slide hammer
Answered by: KHoffnagle
Date published: 2016-11-28

Can this come with an Australian standard power cord?

Asked by: macca
This is wired only with a USA standard 120v Plug.
Answered by: S Church
Date published: 2016-02-03

Can I use the shrinking tip with this model?

Asked by: Maze
Yes, it will fit.
Answered by: MikeL
Date published: 2018-05-02

Do the 2.5mm studs work with this tool?

Asked by: howard63
Hello Howard, The 2.5 mm studs would be just a bit to big for that unit. The largest pin that the unit will take is 2mm.
Answered by: Ed O 88
Date published: 2017-10-28

Can you use Dent Pulling Ring Washers instead of the pins?

Asked by: Dave73
  • y_2021, m_9, d_16, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_31041, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 106.53ms
  • QUESTIONS, PRODUCT
Stud Welder Dent Pulling System
$249.99
Out Of Stock. Due back November 16