Item #
28191
BRAND: Supercoup
Supercoup NR1 Nibbler Metal Shears
Compound leverage cuts metal more easily than typical snips
Compound leverage cuts metal more easily than typical snips
Eastwood HotCoat® Powder Coat Ultra Clear Low Temp - 8oz is rated
out of
5 by
28.
Compound leverage cuts metal more easily than typical snips
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Hand Mini-Nibbler Shear cuts metal with less distortion than snips.
- All-steel construction
- Hardened steel jaws
- Cut-off anvil easily snips-off metal curl
Compound leverage helps you cut metal more easily and with more accuracy than with typical snips.
Specifications
In the Box
Contents
Guides & Accessories
Safety Information
Accessories
28012A 2-Blade Set for Nibbler
Application Tips
All-Steel Construction
Reviews
Rated 5 out of
5
by
Justin from
Great nibbler
Works excellently on automotive sheetmetal, I used it to cut some patch material out of some scrap parts
Date published: 2021-10-03
Rated 5 out of
5
by
James from
Awesome
They work really well, I'm glad i decided to purchase these handy shears
Date published: 2021-07-28
Rated 5 out of
5
by
Able123 from
Great maneuvering with the long handles.
Was able to cut my 4 inch diameter hole in a metal box. The steel box was .022 inch thick (26 Gauge) The nibbler went around the curve just like the picture in the advertisement shows. Very smooth. I liked the way the cutting jaw with the serrations grabbed the material as I cut. No slipping. And it has good reach with those long handles. I like the way it handles.
Date published: 2018-02-16
Rated 5 out of
5
by
Keith from
Nibbler
I have found this to be the tool when needing to do a small job it works great easy to use and very well made, I would highly recommend to all.
Date published: 2014-05-31
Rated 5 out of
5
by
Kingawsomebarry from
Excellent tool
Works well in places where normal shears would have trouble
Date published: 2012-07-30
Rated 4 out of
5
by
Paul from
Another Eastwood purchase
It feels a bit awkward to use. This may be my ignorance. The cutting capability is great. Hopefully the awkwardness will become less as I become more accustomed with using the tool. Quality is good. And as usual Eastwood ships fast.
Date published: 2022-04-08
Rated 4 out of
5
by
Mike850 from
Could have smoother action.
Tried them out for the first time and they definitely cut and in close quarters. Worked well on piece of metal that had a bend already in and needed a cut next to the bend. The only thing i don't like or maybe understand is after a single squeeze the tip hangs up in the sheet metal and you have to push the tool back down thru the metal to get your next cut. I don't know if this will change with usage or not.
Date published: 2021-12-28
Rated 4 out of
5
by
cedainty from
Good tool for jewelry metalsmiths
I'm cutting 22ga copper and brass for bracelets. This tool helps my not so young hands cut the curves, back and forth, in my stock without leaving warped metal edges. There is next no waste.
It was a bit tricky to learn to use and did have some rough remains, but they were easily trimmed with kitchen shears.
Frankly, I would never use them on 20ga steel. The gauge notwithstanding, the nature of the metal itself governs how easily these nibblers cut.
Date published: 2016-02-13
Questions & Answers
What is the correct way the blade fits on shear, should the grooved side be up. mine faces down
I do not have the instruction for that item.
Date published: 2023-09-21
Would this tool be good for making 10 inch straight cuts off of a 16 oz (24 gauge) copper roll? The edges need to be distortion free.
No edges will have slights burrs depending on sharpness of blades
Date published: 2022-07-11
I have approximately 22 gauge, .030" aluminum sheets. I need to cut some detailed, tight curves. I would like to know if it will make cuts with no deformaties along the edge?
there may be some small deformities along the edge as this tool only takes small bites at a time
Date published: 2021-07-11
Will it cut 1/8” aluminum
No. It will cut up to .0625 or 16 gauge aluminum
Date published: 2021-01-20
How wide is the material that the nibblers nibble out? AKA how much wide is the material that the nibblers actually remove from the cut?
These remove approximately a 1/4" from the metal when they cut.
Date published: 2020-04-29
I am cutting up sheet metal objects with uneven surfaces (small corrigation, curved etc) and wonder if this tool would work for this.
This tool would not be a good option for a corrugated surface.
Date published: 2020-02-08
How much does it take off in each snip? I have strips of metal 0.5mm thin, 1/2" wide, and need to trim about 1/4-1/2" off the ends of each strip. Would a single snip be able to take off the whole 1/2" piece or is it multiple cuts?
This will not cut one strip straight across in one cut, for doing this we would recommend using our aviation snips.
Date published: 2020-06-01
Is the cutter round or square? I need to cut internal rectangles and need square corners.
The cutter in this shear is square.
Date published: 2018-10-22
We found other products you might like!
Supercoup NR1 Nibbler Metal Shears
Reg.
$59.99
Sale
$54.97
Save
$5.02
In Stock