Use your TIG welder together with this TIG Spot Weld Nozzle to produce professional spot welds without a large resistance welder.
- Duplicate full-penetration OE spot welds from one side with your existing TIG welder
- No need to buy a resistant spot welder (about $250!) or fool with carbon arc rods
- "Leg extensions" create exact standoff distance for spot welding 20- and 18-gauge steel
About TIG Spot Weld Kit
Spot Welding in the past had primarily been done by large resistance welders but can now be achieved with your TIG welder and this Spot Welding Kit from Eastwood. Spot welding is accomplished by clamping two panels together and fusing them with a number of welds sequentially placed rather than a continuous bead to hold the panels together. This kit is designed to be used with Eastwood's TIG Welders as well as any other brand welder that utilizes a 17 size TIG torch.
This kit includes 2 TIG Spot Weld Nozzles, Spot Weld Pliers, and detailed instructions.
Replacement Parts:13899 Spot Weld Pliers 14150 A Spot Weld
Nozzle Accessories:13525 Pinch Weld Clamps, 4 Pack 12899Z Self Etching Weld
Through Primer, Aerosol 13376 Patch Panel Kit
Follow all safety measures outlined in your welder’s instruction manual.Do not touch nozzle or pliers while welding.Use caution when touching pliers as they may be hot and could cause burns.Always use a minimum Shade 10 welding helmet, welding gloves, long sleeve shirt and pants.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov