Rest assured that your product is covered. The plan begins once your
manufacturer`s warranty ends.
Your service plan documents will be emailed to you within 2 days of purchase.
The Eastwood TIG 200DC is designed for the enthusiast wanting the benefits of TIG welding steel and stainless without the cost of an AC inverter. The TIG200DC is one of the easiest TIGs on the market for set up and use and also includes the most features. A must for anyone wanting to get started in TIG welding!
*Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.
TIG Welding is the most controllable, efficient and versatile method of welding many metals including steel, stainless steel and more. Your EASTWOOD TIG 200 DC WELDER with High-Frequency Inverter Technology is capable of welding thin or heavy gauge steel with precision and ease. The voltage self-sensing circuitry automatically detects a power source range of 110 to 240 volts and delivers from 10 up to 200 Amps DC. The included foot pedal provides the operator with the precise amperage control required when welding. A high frequency start feature guarantees an instant arc strike with no tungsten contamination.
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG 200 DC has a duty cycle of 60% at 190 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 190 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for 6 Minutes with 4 Minutes of cooling for the welder. To increase the duty cycle you can turn down the Amperage Output control. Going above 190 Amps will yield a lower duty cycle.
Click here for product instructions
To get $10 OFF your order!