Item #
20173
BRAND: Eastwood
Replacement Torch Assembly with Metal Plug for Eastwood Versa Cut 40 Plasma Cutter
Brand:
Eastwood
In stock
SKU
20173
Replacement Torch Assembly with Metal Plug for Eastwood Versa Cut 40 Plasma Cutter is rated
out of
5 by
5.
Torch Assembly Versa Cut 40 Metal plug
- 90 Day Returns + 100% Satisfaction Guarantee
- FREE Lifetime Tech Support
QUESTIONS? Talk to an Expert: 
800-343-9353 | 
Chat | 
Email Us
QUESTIONS? Talk to an Expert: 800-343-9353 | Chat | Email Us
Frequently Bought Together
Total price for all checked items:
Description
Replacement Torch Assembly with Metal Plug for Eastwood Versa Cut 40 Plasma Cutter
What's Included
Includes: 1 Replacement Torch
Safety Information
Always wear eye, hand and body protection when operating. Never use near flammable materials.
Accessories
Eastwood Torch Assembly Versa Cut 40 Metal Plug Replacement Plasma Cutter
application_ax
For use on machines WITH A METAL Plug on the machine and torch lead.
Rated 5 out of
5
by
Jared S from
Opps repaired
Great replacement for one we broke. Using a plasma cutter without Air will melt it.
Date published: 2023-01-21
Rated 5 out of
5
by
Bum Lee from
Cuts awesome, warranty is great
Cut like a dream. Used it in my gym (Westbank Athletic Club). Warranty is quick and customer service is great.
Date published: 2015-10-26
Rated 5 out of
5
by
gator 521 from
no problem
had a torch that burnt eastwood made it under wart. thanks alot
Date published: 2015-01-23
Rated 4 out of
5
by
Jadga from
replacement
I had a meltdown of the original. Eastwood was good and replaced it at no cost since it was under warranty. Prompt shipment. I would suggest they get a wire stand-off like they have for the 60 amp cutter. I made one for myself--but should have one come with the unit.
Date published: 2015-01-10
Can I use this with a Klutch 375i? I can not find a diagram for the 375i and it seems like air is blowing back through the unit and I can't get it to work so I thought I could order a new hose and handle?
Call into customer solutions and ask for Sales and they will be able to help you. 800-343-9353
Date published: 2023-08-24
I ordered replacement parts for the torch, thinking I had a bad tip only to discover that the red wire had either burned or corroded off in the handle...is this common? Can it be soldered back in place? Can't really tell exactly where it belonged...
Most likely the wire would go to the safety pins which are spring loaded to make contact with the back of the outer nozzle as you thread it on.
Date published: 2018-03-28
I have burned some of the parts on the inside of my cutter. Mainly the two plastic components within the consumables. One of the plastic parts is removable, the other is not. How can I prevent those plastic parts from burning?
Use the setting chart included with the item for guidelines as far as settings for the material thickness you are cutting. Also make sure you are keeping the end of your torch the proper distance away from the material you are cutting (you can use this guide for assistance in doing so: http://www.eastwood.com/eastwood-plasma-cutting-guide.html. Another main cause of burnt up torches is the consumables not being changed frequently enough, or air pressure not being set correctly.
Date published: 2017-10-26
Why the flow gauge is included with the torch if it is not required and doesn't have any use?
It is what we use to test the item before it is shipped out.. I apologize for the confusion.
Date published: 2016-09-27
I need the Torch Assembly part Number 12811 and can not find it here. Can I use this torch assembly.
If your unit has a plastic connection on the front of the unit then the 20173 will not work with that unit. Give a call to our customer service department and let them know that you need item number 12811. They will be able to get that for you.
Date published: 2015-04-30
What is the clear tube with blue caps?
It is a flow gauge that goes with the torch assembly, but is not a required part that has any use.
Date published: 2017-01-27
I'm looking at your torch assembly versa cut 40 #20173. Will this fit a Chicago Electric 36 amp air plasma cutter model #91814. I seems to have the same connectors.
Our torches and connections were specifically made for our units. I would say no, it will not work.
Date published: 2014-10-03
Product Safety Data Sheet: Search Our SDS Library
California Residents: 
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Replacement Torch Assembly with Metal Plug for Eastwood Versa Cut 40 Plasma Cutter
Sale
$241.97
Reg.
$302.99
Save
$61.02
In Stock