For "kink-free" bending of 3/16", 1/4", 5/16" and 3/8" tubing
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
When you can bend tubing "kink-free", you avoid wasted time and money!
Get your vehicle plumbing up to speed without the need for fancy machinery by using this Eastwood tubing bender and pliers kit. Normally, if you try to bend a brake, fuel, transmission or A/C line by hand, you kink the tube — and if you try to align or form the line by hand, you kink the tube, too. Since you're tired of wasting that time and money, let Eastwood end your frustration with our hand Tubing Bender and Forming Pliers Set. When you can bend tubing "kink-free", you avoid wasted time and money.
Pliers and Bender both bend 3/16" and 1/4" tubing
Bender also works on 5/16" and 3/8" tubing
Aligns, bends and adjusts
Comfort-grip vinyl handles
With a bender and pliers kit, you can create fresh lines with up to 3/8-inch tubing or repair and adjust your current lines. The comfort-grip handles reduce fatigue so you can get more done in an afternoon or evening at the shop. Add our single/double tubing flaring kit and you’ll have everything you need for premium brake lines. Visit the Eastwood Garage for our complete tutorial on how to make your own brake line or call the guys in the shop for expert DIY advice seven days a week.
What's Included
49074 Brake Line Forming Pliers 12435 Tubing Bender
Safety Information
Always wear eye protection when bending rigid lines.
Accessories
Eastwood Steel Tube Pipe Bender Tool Tubing Bender Plier And Brake Line Forming Pliers Kit
Rated 5 out of
5 by
New England Chair Co from
Another great toolThis tool makes line making easy and efficient. No kinking as the tubing is supported in the bend. Add in the hand bending pliers to angle the end of a line and you can make anything.
Date published: 2024-01-15
Rated 5 out of
5 by
Tyler from
Tubing bendersI've been looking at these for years and the bend pliers game changer for tight bends right out the nut for tight engine compartment.
Can't wait to redo junk lines on a couple truck with drum brakes where the spring pack is tight
Date published: 2022-04-16
Rated 5 out of
5 by
JT Benjamin from
Superior Tools To Avoid Sleepless NightsOne word describes these tools...Outstanding for finessing valuable lines the first time with no crimping.
Date published: 2022-03-08
Rated 5 out of
5 by
Mike from
very happy with both of these toolsSo far I have only used it on 3/16 inch steel brake line and they both worked very well.
Date published: 2018-10-20
Rated 5 out of
5 by
Hank from
Eastwood Tubing Bender and Forming PliersBeing new at replacing hydraulic brake lines I thought that bending the line to follow the OE install would be hard. I used coat-hangars as a template and the bending tool and had good results. Sometimes I had to think about the direction of the bend in relation to the plane of the car. My mind had trouble orienting the line in the tool relative to the spatial position in the car. I just went slowly and triple checked before bending. I would not try and bend line by hand given the ease of use of this tool
Date published: 2018-07-27
Rated 5 out of
5 by
Pete 19083 from
Tubing bender works greatI bought the tubing bender for making 3/8” fuel line for my ‘62 Galaxie. Worked ten times better than the el cheapo tool I had been struggling with.
Tubing Bender Kit 13621K
Is this kit made in China or the USA? I only buy from USA manufactures.
Asked by: John
Generally our products are listed Made in USA on the product page if they are.
Answered by: gm75
Date published: 2023-03-09
Will both of these bending tools work for copper and other soft metals without producing any kinks?
Asked by: Brandon
The tubing bender is rated for Copper and Aluminium, as well as regular steel lines. Be sure to use some lube. on the tubing where it will contacts the bender. The forming pliers will work as well but you will need to fineness the bends.
Answered by: Bob G
Date published: 2019-02-02
ISO a 360 degree soft tubing bender for 1/4 5/16 and 3/8” copper. Any suggestions?
Asked by: Jack Hammer
At this time only the forming tool has the ability to form a 360 bend in 3/16" and 1/4".
Answered by: Scott C
Date published: 2018-09-07
Will these work on stainless steel lines?
Asked by: Jh63
These will certainly work on Stainless lines.
Answered by: S Church
Date published: 2018-07-21
What are the radiusses that this tool can bend? You should spec that...
Also, can a 3/8 tube be bent / would it fit on the smallest radius option?
Thanks
Asked by: Toolboy
The largest line size will have a minimum radius of 1.5" and the smallest will have a minimum radius of .92". 3/8 will not fit on the smallest option.
Answered by: S Church
Date published: 2023-04-26
Will these work with metric sizes like 4.75MM ? If not, is there a metric set available?
Asked by: Bobby451
This tool will work with a metric size as long as they have a very close standard equivalent that this tool can do.
800-343-9353 
Chat 
