Enable Accessibility
Promotional desktop banner Promotional mobile banner
Toggle Nav
Do the job right
Search
My Cart
800-343-9353
Menu
Account
Item # 21116 BRAND: Eastwood

Tubing Bender Stand

Use this Stand for with the High Capacity Tubing Bender
Use this Stand for with the High Capacity Tubing Bender
Tubing Bender Stand is rated 4.2 out of 5 by 25.
  • y_2023, m_6, d_2, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasreviews, tv_7, tr_18
  • loc_en_US, sid_21116, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 128.84ms
  • REVIEWS, PRODUCT
$134.99
Loading...
Out Of Stock. Due back July 29
Save for Later
Use this Stand for with the High Capacity Tubing Bender

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Tubing Bender Stand
main product photo
Frequently Bought Together

Price for all checked items:

Product Overview:

Description

Stand for the Eastwood High Capacity Tubing Bender that can be mounted into a shop floor.

Warranty

1 year warranty china

In the Box

Contents

Stand for High Capacity Tubing Bender

Guides & Accessories

Safety Information

Keep fingers and hands away from moving parts while operating this tool. Always wear proper hand foot and eye protection when bending tubing.

Accessories

Additional Tubing Bender Dies

21117 0.75" x 3" Radius, 120° Die
21118 1.0" x 4" Radius, 120° Die
21119 1.5" x 5" Radius, 120° Die
 21120 1.625" x 5" Radius, 120° Die
 21121 1.75" x 6" Radius, 120° Die
 21122 2" x 6" Radius, 120° Die
 21123 0.75" x 3" Radius, 240° Die
 21124 1.0" x 4" Radius, 240° Die
 21125 1.5" x 5" Radius, 240° Die
 21126 1.625" x 5" Radius, 240° Die
21127 1.75" x 6" Radius, 240° Die

Application Tips

Easy To Store When Not In Use

Reviews

Rated 4 out of 5 by from Nice addition No assembly directions included, but it's pretty self-evident how it has to go together. There is some slop in the top mount, but that's not a huge issue.
Date published: 2023-03-05
Rated 4 out of 5 by from Manuel rachet bender Bent snout bars,did a good job,with exception to the small following die drops down,needs washers under neath.the 2 bushings needs shims or washers underneath to hold them in place.Its heavy built,probably will check on a hydraulic cylinder kit,will make bending a lot faster/ easier
Date published: 2022-03-11
Rated 4 out of 5 by from Die handles Hi Can you tell me if the measurements of the die handles that you sell correspond to these measurements in mm that I put below? 21118 - 1.0 "x 4" = 33.7mm, outer diameter 21119 - 1.5 "x 5" = 48.3mm, outer diameter 21120 - 1.625 "x 5" = 42.40mm, outer diameter 21121 - 1.75 "x 6" =? mm, outer diameter 21122 - 2 "x 6" = 60.3mm, outer diameter
Date published: 2020-04-01
Rated 4 out of 5 by from Great product I am very please with the quality of this die. It bends .060 with no deformation at all. Good product at a great price.
Date published: 2017-11-16
Rated 4 out of 5 by from Well built Sturdy No instructions I would have given this stand a 5 Star rating except that this bender did not arrive with instructions....which isnt a huge deal...cuz....if you are going to be using this bender, you should be smart enough to figure it out from the pic.....reason I say is cuz you have to put it together in a sequence or you cant get all the bolts in cuz others are in the way...that being said....the stand seems well built, sturdy, nice paint job and weld job....I currently have not bent any tubing with my bender and 2" die...but I will be sure to get back here and share my experience....
Date published: 2017-06-03
Rated 4 out of 5 by from Good product Bender is great. I've been using it for 1" DOM and it's been flawless thus far. I have to say that the assembly instructions are worse than IKEA. The worst instructions I've ever seen. Other than that I love my bender.
Date published: 2017-05-11
Rated 4 out of 5 by from overall good bender good bender for the price. as compared to more expensive benders, you can see where this one is more economy, but it bends just the same. the die needs a little work to get the tool marks from transferring to the tubing though. i had to use a sanding wheel and cratex to smooth them out. the follower die also needed some light sanding on the edges.
Date published: 2016-11-22
Rated 1 out of 5 by from Ok but watch out for poor quality control. Holding block was welded on crooked and had to be cut off and re welded.
Date published: 2022-07-20
Rated 1 out of 5 by from Poor craftsmanship Tried to bend 2 inch with .120 wall DOM tube on the first time using it and THE DIE BRAKES. Tried to call multiple times to get it returned every time I said “return” I would get disconnected I did this three times in a row. Now the tube bender just sits in pieces in my garage worst $900 ever spent
Date published: 2021-07-28
Rated 1 out of 5 by from Missing parts Missing parts that are neede to use the die after waiting a month for it.
Date published: 2021-07-04
  • y_2023, m_6, d_2, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasreviews, tv_7, tr_18
  • loc_en_US, sid_21116, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 18.32ms
  • REVIEWS, PRODUCT

Questions & Answers

will you be making a 2.5 inch die?

Asked by: gordon
At this time there is no 2.5" die in the planning for the Eastwood High Capacity Tubing Bender(21115)
Answered by: vince
Date published: 2021-01-13

Is there a 1 1/4 round tube die for this bender

Asked by: Gene B
Unfortunately we do not offer this size die at this time.
Answered by: Kelly H
Date published: 2020-12-12

Do you get a die when you purchase the bender? Or are they all sold separately?

Asked by: Mitcheni
The Dies, the handle and the base/pedestal are all sold separately and can be purchased at www.Eastwood.com or call 1-800-343-9353
Answered by: vince
Date published: 2020-11-30

What minimum wall thickness will it Bend without kinking? Asking for all the does.

Asked by: High Country NM
These dies form bends in up to 0.120” wall tubing.
Answered by: ZachC
Date published: 2020-09-17

Is this compatible with the Woodward fab tubing bender?

Asked by: Justin
Unfortunately we don't test with other brand benders to confirm or deny if they're compatible.
Answered by: Scott C
Date published: 2020-09-16

I have Woodward dies. Will the Eastwood pins fit in Woodward dies? Thank You in Advance.

Asked by: beer4life
Unfortunately we have not tested with other brand unit for compatibility.
Answered by: Scott C
Date published: 2021-01-10

I need this for a project but i need a die for 1.25” tubing

Asked by: Kjhkaku
Unfortunately at this time we don't have a 1.25 die for this unit.
Answered by: Scott C
Date published: 2020-06-15

1-5/8 type L hard copper tubing? Without kinking?

Asked by: Alex
Heat the copper and it will bend it with no issues. 
Answered by: Andrew
Date published: 2020-10-21

Does this fit the Woodward fab wfb2 bender?

Asked by: Jose
Yes it will fit the Woodward Fab WFB2 bender.
Answered by: Anonymous
Date published: 2020-02-15

Will these dies fit the Woodward benders?

Asked by: Jorge556
I can confirm 100% this die will fit the Woodward Fab WFB2 bender. I have the Woodward Fab bender and my buddy has the Eastwood so we swapped dies and they fit Perfectly.
Answered by: Anonymous
Date published: 2023-02-04

The strap on my tubing is so tight at the end of my bend that I cannot remove the pin without using a brass hammer.  Please help! 

Asked by: Richard
Back up on the tool to relieve the tension of the bend from the tubing. Then loosen the strap bolt and the pin should come out much easier.
Answered by: Bob G
Date published: 2020-10-21

Looking for hydraulic bender to handle 3” OD pipe for exhaust

Asked by: Snelly
As of this time, Eastwood does not offer a 3" die or a hydraulic tubing bender.
Answered by: Bob G
Date published: 2020-01-30

What size wall thickness will this die handle at 180 degrees?

Asked by: Tube bouncer
120-degree wall will be the thickest this would work on.
Answered by: SeanW
Date published: 2020-06-01

I'm wondering, since some of these are 240 degree dies, how do you get the tubing off the die after you've bent it past 180 degrees?

Asked by: Josh
The tubing has to be cut if bent past 180 Degrees
Answered by: Bob G
Date published: 2020-06-01

What size is the retaining bolt and followbar pin?

Asked by: Danguy
21.8mm is the follower die pin diameter. the tube retaining bolt is a M10X1.25
Answered by: Kelly H
Date published: 2020-01-15

do you have a 1.125 120 degree die

Asked by: jackmod17
Unfortunately, we do not offer any 1.125 dies at this time. Here is a link which will list all of the dies we currently offer https://www.eastwood.com/eastwood-high-capacity-tubing-bender.html
Answered by: Kelly H
Date published: 2020-01-12

If a 240 degree die will bend up to 240 then why will you need the 120 degree die ?

Asked by: byrd60
we offer the 120 degree die as a lower-cost alternative for customers that don't need to be beyond 120 degrees
Answered by: Bob G
Date published: 2020-06-02

Will Woodward Dies work for this bender? You don't offer a 1 1/4" die...

Asked by: Andrew
Unfortunately we can only guarantee compatibility with dies that we offer. Our items can be returned within 90 days of the purchase date if it would not work for your application.
Answered by: Kelly H
Date published: 2019-11-01

Will this die work in other benders or only eastwood's?

Asked by: Dirty67
We can only guarantee compatibility with our unit which this is designed for. You can always give it a try and return it within 90 days of the purchase if it will not fit your unit.
Answered by: Kelly H
Date published: 2019-09-18

do the dies direct fit the mb105hd

Asked by: CHARLES
We have not tested our dies with other manufacture's tools.
Answered by: Bob G
Date published: 2019-07-25

I am bending 1.5 aluminum tubing and keep getting wrinkles every 1.5 inches or so consistently on the inside of the bend. How do I prevent this? Also do you sell square tubing dies?

Asked by: Gary
Bending Aluminum is a virtually impossible to do with this bender, especially with a thinner wall. It does tend to kink soft aluminum and copper. Harder aluminum would be ok. Works best on mild steel and chrome moly steel.
Answered by: Bob G
Date published: 2020-04-09

Do you use or recommend any lubricant for use on the die and follower? If so, any particular type/brand or even cooking spray, like PAM, for example?

Asked by: MarcS
Yes we do recommend a lubricant, anything like wheel bearing grease, motor oil, just a thin coating is all that is needed. In addition to the Lub. it is always a good idea to run a scuff pad over the tubing where the bend will be. This will remove any burrs from the tubing.
Answered by: Bob G
Date published: 2020-06-02

Will it bend aluminum tube without kinking

Asked by: Jimmy
Form bends in up to 0.120” wall tubing Range of 11 available 120° and 240° dies for 3/4” to 2” diameter tubing Handles aluminum, copper, steel, stainless steel and chromoly with ease
Answered by: Bob G
Date published: 2019-04-20

How do I get a smooth bend? It’s pitting a kink in the pipe every time I try to use it 

Asked by: VonG
When using this bender a good idea is to take a scuff pad and make sure that there are no burrs on the tubing. The tubing must be lubed,a multi grade lube would work well. Also insure that the bolt on the U strap is snug so there is no slack. Also make sure that your wall thickness is within the specs.
Answered by: Bob G
Date published: 2020-07-30

Can you get HCK-WFBDT 1''x3'' radius

Asked by: Doug
The closest die we would have would be Item #21118 https://www.eastwood.com/1-0in-x-4in-radius-120-degree-die.html
Answered by: Bob G
Date published: 2020-03-03

What is the weight of the hole set?

Asked by: Jose
The total weight of this tool is 148 pounds. The weight may change depending on what die you get with your other components.
Answered by: Bob G
Date published: 2019-03-31

What is the pin hole diameter on these dies?

Asked by: Andrew
Pin hole diameter is 7/8'
Answered by: Bob G
Date published: 2018-11-06

does,it come with a shoe set ?

Asked by: Brian
The dies are not included as this allows you to only buy the size die you need.
Answered by: Scott C
Date published: 2018-12-24

I just purchased your bender to build nhra roll cages and chassis. do you 1x5 x5 die will it work on 15/8 083 chrome moly tubing? and can you convert it to hydraulic over electric? if so what ram will work and what's the max stroke for your bender?

Asked by: pete
Our 1 5/8" die will work with this material. Unfortunately we do not have a kit to convert this unit to hydraulic.
Answered by: Kelly H
Date published: 2019-04-29

How do you achieve a 5" radius with this die? Mine measures 8" from side to side on the inside of the die, so in theory that would be impossible. Am I missing something, or was I just sent the wrong die?

Asked by: Jacob D
The radius is measured from the middle of the tubing. This means if you were to bend a 180 degree bend you'll achieve a 10 inch diameter when measuring to the middle of the tubing.
Answered by: Scott C
Date published: 2018-07-09
  • y_2023, m_6, d_2, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_74
  • loc_en_US, sid_21116, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 122.03ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Tubing Bender Stand
$134.99
Out Of Stock. Due back July 29