Item #
50751ZP
BRAND: US Chemical
USC All Metal 1-Quart
Aluminum-based filler can be drilled
or tapped; rustproof, waterproof
or tapped; rustproof, waterproof
Aluminum-based filler can be drilled
or tapped; rustproof, waterproof
or tapped; rustproof, waterproof
USC All Metal 2.1 lb is rated
out of
5 by
17.
Aluminum-based filler can be drilled
or tapped; rustproof, waterproof
or tapped; rustproof, waterproof
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Repair metal with metal—instead of lead—using USC® All-Metal
- Can be drilled or tapped
- Aluminum-based filler
- Rustproof and waterproof
- Includes hardener
Ideal for your restoration projects, USC's All-Metal offers excellent adhesion to metals (even stainless) and wood.
Specifications
In the Box
Contents
Guides & Accessories
Reviews
Rated 5 out of
5
by
Rollin Thunder from
Great Stuff
The product is easy to work with and is easy to sand once you figure out the right mixture. If you're looking for a filler better than bondo this is it. Highly recommened.
Date published: 2013-02-14
Rated 5 out of
5
by
Dgritti33 from
Great product
Great product for small areas, easy to apply and work with. After you figure out the product to hardener ratio it's much easier to apply and let dry. Highly recommended
Date published: 2012-12-02
Rated 5 out of
5
by
Anonymous from
FANTASTIC PRODUCT
This filler is versatile with respect to mixing and application especially if only small amounts are used at one time; ie golf ball sized. Sands and feathers well. Very easy to work, shape, and sand. Seems to sand best by hand. Takes primer and top coats well and doesn't seem to shrink in a few days like some fillers tend to do. I am working in temps at around 55 degrees so I allow about 4 hours before I attempt a sanding operation. I will purchase more within one or two days from now.
Date published: 2011-02-28
Rated 4 out of
5
by
Geno from
All metal filler
Be sure to add enough hardener, it’s not quite as forgiving as polyester filler. Be ready to apply to area asap, short work time. All metal sets up extremely hard and sticks very aggressively, good for sealing in any repair
Date published: 2021-08-23
Rated 4 out of
5
by
Jeep1265 from
Fills good
Bought this product to help fill in weld in patches. It worked very well on the windshield frame that I was repairing.
Date published: 2016-02-02
Rated 1 out of
5
by
john from
lost me as a customer
Never sent the hardener call Eastwood they said its on its way a year later I am still waiting on it
Date published: 2021-07-28
Questions & Answers
Can this be used on fuel tanks to stop a leak
We would not recommend the All Metal for a gas tank repair. The PC-7 Epoxy would be a better choice. Item #52195. https://www.eastwood.com/pc-7-epoxy-1-2-lb-can.html
Date published: 2020-01-16
Can this be used on surfaces sealed with POR-15 or should I apply this first and then seal it with POR-15?
This product should go direct to metal for best results.
Date published: 2020-02-08
I work at a fab shop and we weld frames and get them painted. We currently use Evercoat Bondo to fill in seams and gaps prior to paint however our customer is asking for Powdercoat instead of wet paint. Do you reccomend any Bondo that would work with po
The only filler we have that would be able to withstand the temperatures required to bake to cure powder at would be the High Temp. Lab Metal: https://www.eastwood.com/hi-temp-lab-metal-24-oz.html
Date published: 2020-02-08
Data sheet says it can be powder coated up to 400f. This product is better sanding result compared to hi temp metal?
This product will sand better, however, it will not attract the powder to the product. The only way to apply powder to the all-metal is to hot flock it on.
Date published: 2020-02-08
I’ve replaced small metal sections in my cowl (limited access) but have small pin holes. I plan to use encapsulator platinum then something like USC All Metal to put a finish on it and seal small holes. Will this work or is there something better?
If you truly have pin sized holes, this product will work well. If the holes in your metal are a little larger
then pin hole size, we would suggest to weld in new metal.
Date published: 2020-02-08
Is this the same as what used to be called ALUM-A-LEAD made by Ditzler Auto finishes. Many years ago. It was a very good product back then. Over 40years ago.
We have never tested this product in comparison with the ALUM-A-LEAD. We can tell you that it does a great job on filling weld seams. As it is waterproof, and is very strong.
Date published: 2020-07-23
can this product be used over epoxy primer
This filler can be applied over top of our Epoxy.
Date published: 2024-01-23
Can it be applied over rust encapsulator?
Yes this could be applied over top of properly prepped Rust Encapsulator.
Date published: 2020-02-08
Can this be applied over top the all-u-need primer by Clausen?
We do not test with other branded primers an can't guarantee compatibility.
Date published: 2019-02-04
What keeps the metal from rusting underneath from electrolosis occuring.
This product is manufactured by US Chemical and is a proprietary formulation. As such, Eastwood has no knowledge of any anti-electrolysis properties. This question is beyond the scope of normal preparation, usage and storage.For detailed chemical composition questions as this, we have to suggest that you contact US Chemical directly.
Date published: 2018-11-02
Can this be powdercoated ?
This is not designed to handle the heat of powder coating applications. you would want to use the High temp Lab metal: https://www.eastwood.com/hi-temp-lab-metal-24-oz.html
Date published: 2018-03-29
Hi I wanted to know the shelf life of a All Metal quart Can. Thank you.
We recommend a shelf life of no more than 2 years with a liquid product.
Date published: 2017-08-02
How thick can this product be applied
Body fillers should be kept to 1/4 inch or less.
Date published: 2018-02-08
Can this be used on fiberglass panels or other composites
Yes, this can be used on fiberglass.
Date published: 2019-07-14
If the product has aluminum in it, will it react with the bare steel, 2 dissimilar metals through electrolysis? or do you prime first with a special primer?
No special primer is necessary as this adheres well to bare metal.
Date published: 2018-08-10
What is your best product for body filler for a cj2a jeep. It will go thru a oven at 400 degrees for proper time for curing the powder, olive drab green? Thanks
The High temp :ab metal would be your best option for filling before powder coating: http://www.eastwood.com/hi-temp-lab-metal-24-oz.html.
Date published: 2017-01-27
Can this be used for filling the seam between the quarter panel and roof skin instead of lead?
Yes, you can certainly use this for that application.
Date published: 2020-12-28
What is the temp values for this product, can it withstand say 500° f for 20 mins? Can this be powdercoated?
This will not survive powder coating. It will not make it much past 200F. You should look into the High temp Lab Metal for powdercoating.
Date published: 2016-03-30
Can this be used to build up edges of fenders and doors to correct excessive gaps?
Yes, it can be used to build up minor gaps. You can also use a fiberglass reinforced filler like Duraglas to do the same thing.
Date published: 2018-05-18
Can this be used over existing / deteriorated lead repairs?
Ideally the lead should be completely removed and then replaced by this product, especially if the lead has deteriorated.
Date published: 2017-03-27
We found other products you might like!
USC All Metal 1-Quart
$51.99
In Stock