The Eastwood Versa-Bend Forming Brake is designed to be used with the Eastwood #14042 Versa-Bend 20" Sheet Metal Brake to create multiple bend channel shapes as narrow as 3/8" (9.5mm).
- Works with 20 gauge steel and 18 gauge aluminum
- Use on panels up to 20" wide
- Excellent for creating hard to form parts
- Create window channels, floor braces, weatherstrip retainers and much more
When the precision machined Versa Bend Forming Brake is teamed with the Eastwood Versa Bend Sheet Metal Brake, you are enabled to make precise bends within 3/8 in of each other up to 90 degrees in 20 gauge sheet steel and 18 gauge aluminum in widths up to 20 Inch. Create floor reinforcement channels and ribs, door sills, sections of corrugated pickup bed floors; truck bedside panels, inner fender structures and much more all with one convenient vise or bench mount tool.
20 in sheetmetal brake with hardware included. 2 bolts and 2 washers.
Use extreme caution when mounting or dismounting when using a vice or other temporary fixturing arrangement. Personal injury could occur if tool is dropped. Pinch Hazard. Keep fingers away from moving parts when operating. Wear appropriate work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands and arms. Wear appropriate eye protection. Metal chips can be ejected during the bending process.
90 Day Warranty
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov