Item # 20062 BRAND: Eastwood

Eastwood Versa Cut 20 Amp Plasma Cutter

15 Amps output cuts up to 1/8" 110v input
15 Amps output cuts up to 1/8" 110v input
Eastwood Versa Cut 20 Amp Plasma Cutter is rated 4.5 out of 5 by 21.
  • y_2021, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_2, tr_19
  • loc_en_US, sid_20062, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 79.43ms
  • REVIEWS, PRODUCT
Reg. $449.99 Sale $399.97 Save $50.02
Loading...
Loading...
Save for Later
15 Amps output cuts up to 1/8" 110v input
  • 90-Day Returns
  • Technical Support
Eastwood Versa Cut 20 Amp Plasma Cutter

Description

Cut Quickly, Cleanly with Precision

Designed especially for cutting automotive sheet metal with speed and accuracy.

The Eastwood Versa Cut 20 Plasma Cutter Features:

  • Minimal air requirements, only 3 CFM @ as low as 30 PSI
  • High precision 0.65mm cutting tip provides a narrow cut with minimal slag.
  • Eliminates the need to weld-prep panels for welding
  • Delivers a powerful 15 Amps of output to cut up to 1/8” thick metal
  • Compact case is easy to pick up and carry. Weighs less than 20lbs
  • Operates anywhere on standard 110V current
  • Uses common consumables that are available at Eastwood or most welding supply stores


Eastwood Versa Cut 20 Plasma Cutter

Perfect Plasma Cutter for Body Work

This is the Plasma Cutter to have for cutting out rusted floors, body panels and more. Perfect for trimming new panels and cutting up to 1/8” thick stock.

Eastwood Versa Cut 20 Plasma Cutter
Eastwood Versa Cut 20 Plasma Cutter

Precise Clean Cuts

The Eastwood Versa Cut 20 Plasma cutting was developed to be the most precise unit in our offering. With the Cut 20s smaller more precise 0.65 mm cutting tip, you are able to cut sheet metal with little to no slag which enables you to weld without having to clean and prep the material. This extremely light unit runs off of a 110v service. 15 amps of cutting power enables clean cuts of up with 1/8 Inch material.

Specifications

Input:110 VAC
Output:15 Amps
Duty Cycle:40% @ 15 Amps
Torch:Trafiment S25K
Torch Tip0.65 mm
Max Cut1/8"
Minimal Air Requirements:3 CFM @ as low as 30 PSI
Torch Cable Length:20'
Ground Cable Length:10'
Backed by Eastwood's no-hassle 3-year warranty

Warranty

3 Year Warranty

100% Satisfaction Guaranteed

Contents

  • (1) Eastwood Versa-Cut 20 Plasma Cutter
  • (1) Trafimet Style S25K Torch with 20' [6m] Supply Line
  • (1) 10' [3m], 120 VAC, 14 gauge grounded Power Cord
  • (1) 10' [3m], Ground Lead and Clamp
  • (1) Extra Electrode
  • (1) Extra Nozzle
  • (1) Instruction Booklet
Our Versa Cut Plasma Cutter is supplied with the popular NEMA 15P plug, requiring a NEMA 15R receptacle.

FAQs

15 amps output at 86 volts. 40 percent duty cycle at 15amps. Recommend use with a 20 amp 120volt circuit.

Application Tips

High Precision 0.65Mm Cutting Tip Provides A Narrow Cut With Minimal Slag

Safety Information

Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user serviceable parts.

Customer Reviews

Rated 5 out of 5 by from A Must have I got this months ago and finally got time to start my project. It makes getting rusty bolts and factory rivets a snap to get off. It has saved me so much time really glad I made the purchase.
Date published: 2020-09-28
Rated 5 out of 5 by from Perfect I bought this for car restoration and was blown away with the fine cut it does. Very handy little plasma cutter. Very pleased
Date published: 2020-08-26
Rated 5 out of 5 by from Amazing performance I purchased the 20 versa cut, and have to say that this small unit can perform over what is expected. I’m a metal fabricator for over 27 years and have used every industrial unit on the market and was totally surprised at its performance. I purchased this unit to fabricate yard art in my preretirement days and wish I picked it up sooner. Nice job Eastwood!
Date published: 2020-06-13
Rated 5 out of 5 by from Impressed with how well it works.. I have to say I am impressed on how well this small cutter makes short work out of cutting old rusty panels. The Pilot Arc start works great and the cuts are clean.
Date published: 2019-12-07
Rated 5 out of 5 by from Versa Cut 20 -- great deal and great Plasma Cutter Been using mine for about 6 months and have probably cut a couple hundred liner feet of mild and stainless steel with no issues. Of course I have gone through some consumables, but I've had no issues and am really impressed with this little machine. I've even been able to cut mild steel thicker than rated with a little boost of extra (clean and dry) air.
Date published: 2019-04-02
Rated 5 out of 5 by from Great investment I have just used it on a couple small job and i'm looking forward to using it on my 68 C10 i'm restoring , replacing a lot of rusted metal .Very pleased
Date published: 2019-01-11
Rated 5 out of 5 by from Beats body saw hands down Really speeds up metal work on my 73 Mach1. Use it to cut out rusty panels and cut replacement patches. Don't take the body saw out of the tool box very much any more
Date published: 2018-10-28
Rated 5 out of 5 by from Works well I have had this for a month now and so far it works well. 20 gauge steel cuts easily but you have to slow down for 1/8 inch. Once you learn the trick it works great. I'm doing body work on a 1967 Mustang so this seems to fit the job and the price is good. The air inlet sticks out the back so it interferes when installed on the cart. Had to put in a 90 degree fitting and bring the air out the side.
Date published: 2018-10-25
Rated 5 out of 5 by from so great I just got mine in the mail took only 2 days awesome. With in 5 mins i was slicing sheet metal like butter. I have always been hesitant about buying a plasma cutter because they are expensive but this one is very well priced works great on sheet metal this will save so much time in my shop.
Date published: 2018-09-26
Rated 5 out of 5 by from cuts fast and clean got my cutter bout 3 months ago, finally got to use it today. made some exhaust brackets with it. wasn't used to the short delay before it cut, but it did a grat job. will pay for it's self when I restore my car.
Date published: 2017-09-11
Rated 5 out of 5 by from Best Spot Weld Remover Have had this for about 8 months now. Very pleased with how well it works for the price. I Had never used a plasma cutter before I got this, and my only regret is that I did not buy a bigger one. I wish I could use it on thicker stock since it's so fun and cuts so well. I mostly use it on sheet metal, but have used it to cut 1/8" steel (barely). Took me some practice to figure out how to gouge effectively, but now I think it's the best way to take out spot welds. I tried grinding & drilling them, but this is much faster. It's worth the price just for that. Still on the original nozzle.
Date published: 2017-03-20
Rated 5 out of 5 by from a lot of bang for the buck easy to use setup instructions could be a lot better,excellent unit for persoal use. however description of accessories ie.extra nozzels and electrodes appear to be included with unit there not these items wear with use ayear or two you may have an unuseable tool.i purshased the extra parts at 43 dollars additional cost only then did eastwood correct their web with part #s nor did i get my 10% discount as promised.all in all bought many items from eastwood very satisfied shipping and e mail notifications could be faster. and dont use us mail there terrible,i pay for fed ex or ups you can count on them.i like eastwoods products and your chicago store gave a great tour to our car club chicago gearheads mostly allchicago police members. thanks
Date published: 2016-01-11
Rated 4 out of 5 by from It Did Not Work When I Took It Out of the Box Overall I am happy with the Plasma Cutter. It's light and portable and easy to use and cuts 20Gauge sheet metal, used on a motor vehicle, just fine. The unit however did not work when I took it out of the box. Air was escaping from the water drain bottle, which did not have a cap on the bottom of the bottle. I had previously installed my own water drain bottle on the outside of the unit at the behest of the directions. After opening rather unit up I was surprised to find another water drain bottle inside the cabinet. I removed the installed bottle bottle, and submitted it with my own which was almost identical to the OEM unit. After that the unit worked fine. I still don't understand why Eastwood would have me install another drain unit back to back with their unit. In any event I'm happy with the unit and it portability. I rated it four stars because the unit was broke when I took it out of the box.
Date published: 2017-08-31
Rated 3 out of 5 by from Works as advertised. Pulled it out of the box and hooked it up...not to difficult...started right up...put a filter to keep the air dry...seems to cut well...wish the tip/cone was more tapered so that you could follow/trace your drawing for free hand cutting.
Date published: 2016-05-17
Rated 2 out of 5 by from pulled it out of the box after 10 sec, the overload light flashes and it quits working. called eastwood and they said to return it. east woods customer service gets a 5/5, this little plasma cutter still hasn't worked. i'll add an update when a new one arrives in two weeks. so far not that excited.
Date published: 2016-02-05
Rated 1 out of 5 by from Not happy It was broke when I got it as soon as you pulled the trigger it went into safe mode
Date published: 2016-01-21
  • y_2021, m_10, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasreviews, tv_2, tr_19
  • loc_en_US, sid_20062, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 44.76ms
  • REVIEWS, PRODUCT

Questions & Answers

Will the Eastwood 20 cut though field disc plates for art work or would the 40 a better fit?

Asked by: Slick
If the plates are within the 1/8" cutting ability of the unit it will able to cut through.
Answered by: ZachC
Date published: 2020-01-24

I've told plasma cutter doesn't work if there's lots of rust involved,because it will not make a good ground. Is this true?

Asked by: Hot rod tom
It is always best to start your cut on as good clean metal as possible. Once the cut has been established, the plasma will cut through a mild amount of rust. The ground clamp should be on clean metal as well.
Answered by: Bob G
Date published: 2020-01-24

Ok just ordered me the VC20 and wondering if the size of the air tank on compressor would matter, For small jobs? Until I get a bigger one.

Asked by: Victor
We apologize for the confusion. As long as the air compressor is capable of delivering 3CFM@30PSI (which is pretty minimal) then the air compressor would be adequate. You can certainly use a larger compressor as well as long as you regulate the air down entering the machine (We do not recommend exceeding 90PSI).
Answered by: Kelly H
Date published: 2020-05-19

can this be used for gouging instead of s straight threw cut ?

Asked by: trickenrides
Our Plasma cutters are not intended to be used for gouging.
Answered by: Kelly H
Date published: 2019-12-15

can this unit be operated on 20 amp GFI circuit?

Asked by: chevy fan
Yes this unit can be operated on a 20 GFI circuit.
Answered by: Kelly H
Date published: 2020-07-29

Does the Versa 20 cut aluminum?

Asked by: Eric
Yes this unit can be used to cut aluminum.
Answered by: Kelly H
Date published: 2019-08-20

Can I use this for a Cnc machine..like a Plasmacam 

Asked by: Frank
This can't be used with a cnc machine due to the high frequency start.
Answered by: SeanW
Date published: 2020-11-19

Can you advise the actual size of the machine box. L X W X H? Thank you for your time,

Asked by: welderboy
This unit is 15" x 6.5" x 11.5"
Answered by: Kelly H
Date published: 2019-05-16

I'm new to plasma cutting. Do you need and gas for this like argon?

Asked by: Redbeard
Our Plasma cutters use just regular Shop air, from a air compressor.
Answered by: Bob G
Date published: 2019-05-16

Will this machine work on a cnc machine?

Asked by: Pooh
All of our Plasma cutters have High Frequency start. The high frequency start will interfere with your CNC set up.
Answered by: Bob G
Date published: 2018-12-17

What size air compressor would I need for this this plasma cutter

Asked by: Jake
You only need a compressor large enough to produce at least 3 CFM @ 30 PSI. Most 20-30 gallon compressors would be perfect, but double check the specs of the compressor to verify.
Answered by: Scott C
Date published: 2019-05-16

Is there a drag tip for this cutter? I see the regular ones.

Asked by: skidooguy68
This plasma cutter is already included with a drag tip.
Answered by: SeanW
Date published: 2019-10-02

Does this feature a continuous pilot arc? To clarify, that means while holding the trigger it will immediately make a pilot arc if a cut is interrupted for any reason.

Asked by: Fopeano
It will not be a continuous arc. Only to start the cut. If something interrupts the cut you will simply have to release and re pull the trigger.
Answered by: Scott C
Date published: 2019-05-16

Can i cut 16 Gage stainless steel with this machine

Asked by: Ruzz
This machine will be able to cut up to about 1/8th inch thick metals.
Answered by: Scott C
Date published: 2018-08-20

 So the specs say this machine will cut up 1/8" Steel, but a few of the reviewers really put this into question with remarks such as "barely" and "struggled". Could this be operator error or should the Versa 20's range be changed? I use a lot of 1/8"

Asked by: BLAKE
As this unit is certainly capable to cut up to 1/8th inch your limiting factor is the power you are plugged into. It is certainly possible these customers we bogged down by a poor power source at their house. With that said though if you know you will be doing a lot of 1/8th work and have the access to a 220v power source our Versa Cut 40 might be right up your alley.
Answered by: Scott C
Date published: 2019-09-21

will this run with your 3 gallon oil less pancake compressor. What other small compressor would you recommend?

Asked by: Greg
This unit requires a unit that can put out at least 3 CFM@ 30 PSI.
Answered by: Scott C
Date published: 2019-05-16

When will this be back in stock?

Asked by: Mike
This item is currently expected to be back in stock around early-mid February.
Answered by: Kelly H
Date published: 2018-02-02

Can it be used in a CNC machine

Asked by: leov
We do not recommend running our Plasma cutters on CNC machines.
Answered by: Scott C
Date published: 2018-12-16

When I press the button, an arc arises and everything is ok. However, the arc exists ~ 5 sec. and then disappears. You need to release the button, and then press it again and again an arc arises and everything goes off again and so on. Is this a normal ?

Asked by: asus
If you are not actively cutting this is completely normal as the unit shuts the arc down to save the consumables.
Answered by: S Church
Date published: 2019-10-05

Does the 20 have the same type arc start up as the 40 ? And how long can you cut with this unit cranked up? Will it cut thru paint ok?

Asked by: Restodude
This unit is also a high frequency start that should have paint removed before cutting.
Answered by: S Church
Date published: 2019-05-16

What are the Dimensional Measurements of the Cabinet? (I'm building a Welding/Plasma Cutter Cart to keep everything tidy & within reach. I have the Easytwood MIG 135)

Asked by: Wyldhorse
This unit is 15"L x 11"H x 6.5"W.
Answered by: S Church
Date published: 2019-05-16

HI: HOW LONG DROP CORD CAN I USE

Asked by: terry7027
We recommend at least a 10 gauge no more than 25 feet long.
Answered by: S Church
Date published: 2019-05-16

Does it come with the items listed in the "More Information" tab? Accessories 20614 Torch Assembly, 20615 Electrode (10pk), 20616 Nozzle(10pk), 20617 External Nozzle, 20618 Air diffuser (2pk)

Asked by: InMyImage
This unit will not come with those accessories. They are all available separately to replenish you consumables.
Answered by: S Church
Date published: 2019-05-16

What amp breaker would I need in my breaker box

Asked by: jooo
This unit only requires a 20 amp breaker.
Answered by: S Church
Date published: 2019-05-16

Does it come in a 223 volts version?

Asked by: judge70
This unit only comes in a 120v version. If you would like a 220v version you could consider the versa cut 40 or 60.
Answered by: S Church
Date published: 2017-05-22

is it self contained compressor or do you need outside air source?

Asked by: milan
This unit does not have an internal self contained air compressor. You will need a compressor capable of 3 CFM @ 60 PSI.
Answered by: S Church
Date published: 2019-05-16
  • y_2021, m_10, d_19, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_20062, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 88.31ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Eastwood Versa Cut 20 Amp Plasma Cutter
Reg. $449.99 Sale $399.97 Save $50.02
In Stock