Scroll Compressor
  • Home
  • Eastwood Versa Cut 60 Plasma Cutter

Eastwood Versa Cut 60 Plasma Cutter

Eastwood Versa Cut 60 Plasma Cutter

Item #14099 Brand: Eastwood

60 Amps output cuts up to 7/8" 220v input
Quantity: close

In stock

Only $774.99

Sale $697.97


< Back


Versa Cut 60 Plasma Cutter

Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through mild steel, stainless steel or aluminum. This powerful unit can neatly cut materials as thin as 24 gauge or as thick as 7/8-inch. Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster and makes curved and intricate cuts more easily and precisely. In particular, cutting stainless steel or aluminum with a plasma cutter offers a far easier solution that will save you time and money in the long run. We stand behind our machines with no-hassle returns and an industry-leading warranty, which means you can be confident in their capabilities.

**Note: Due to the High Frequency start feature, we do not recommend using this machine on a CNC plasma table.**

The Eastwood Versa Cut 60 Plasma Cutter Features:

  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Uses common consumables that are available at Eastwood or most welding supply stores
  • Backed by Eastwood's no-hassle 3-year warranty
Eastwood Versa Cut 60 Plasma Cutter

Powerful Metal Cutting

You may not need to cut through super-thick metal often - but you'll know you can with the Versa Cut 60. This 220v, 50 to 60Hz, 60-amp output portable plasma cutter is designed to cut steel, aluminum and stainless steel anywhere from 0.010- to 0.875-inch thick with ease. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results. It requires a 50-amp breaker and plugs into an appropriate wall outlet.

The Versa Cut 60 comes with a heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator. These features and parts assure long life, accurate cuts and ease of use. It also includes a self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue. The machine has a duty cycle of 60 percent for long continuous cuts. At 45 pounds, it is light enough to bring to a friend's shop, a race track or any other place that metal needs to be cut.

Expert Service & Support

We hear the question all the time: can you cut stainless steel with a plasma cutter? The answer is you can do that and much more when you have the Versa Cut 60 and support from the guys (and gals) at Eastwood. Scroll down this page to find product instructions, set-up charts, accessories and other things you might need for plasma cutting. We also have demonstration videos and article tutorials in the online Eastwood Garage.

Eastwood Versa Cut 60 Plasma Cutter Accessories

More info...
< Back


(1) Versa-Cut 60 Plasma Cutter
(1) Trafimet CB70 Torch and 20’ Supply Line
(1) 10’ Ground Lead and clamp
(1) Instruction Booklet
(1) Face Shield
(1) Extra Electrode and Nozzle


Input: 220 VAC
Power Cord Receptacle Plug: NEMA 6-50R
Power Cord Length: 5'
Output: 60 Amps
Duty Cycle: 60% @ 60 Amps
Torch: Trafimet CB70
Torch Tip: 0.1mm
Max Cut: 7/8"
Air Compressor Requirements: 5-7 cfm @ 60 psi
Torch Cable Length: 20'
Ground Cable Length and Gauge: 10' long, 5 gauge wire
Unit Dimensions: 19.5" Long X 14.5" Tall X 8.5" Wide
Unit weight: 45 LBS


Click here for product instructions

Click here to see our Versa Cut 60 set-up chart


Always where eye, hand and face protection when cutting.

Click here to see safety products


3-year warranty.
100% Satisfaction Guarantee

Accessories & Consumables

Parts & Consumables

21543 Trafimet Versa-Cut 60 Plasma Cutter Consumable Kit
21553 Plasma Cutter Nozzle CB50/70 1.0mm
21554 Plasma Cutter Nozzle CB50/70 0.8mm
21555 Plasma Cutter Air Diffuser CB50/70
21557 Plasma 60 Electrode CB70
21558 Plasma 60 Outer Nozzle CB70
20620 Eastwood Versa Cut Plasma Cut 60 Cover


13689 Plasma Cutting Guide
13948 Plasma glasses
Torch Assembly Versa Cut 60 Metal plug

Eastwood Cut and Weld Work Stand TopClick here to see Cut and Weld Accessories
Convert your Fender Stand into a welding table or plasma table!

Product Video

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm -

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: