If you want to get better at anything you need to practice and push yourself to try things a little out of your skill/comfort level. Metal Shaping is 100% one of those things that you need to practice and work to get better at, even if it means wrecking a […]
Projects
How to Build Motorcycle Gas Tank Sides with Ron Covell
This year he showed how to make a motorcycle gas tank side with a voluptuous compound curved shape using some of the most basic metal shaping tools. In this demonstration he shows how to make the left side of the tank.
How To Spray your first Wild Kustom Paintjob- Custom Lined, Candy and Flaked Skateboard Deck
Flake, Pearl, Candy, Lace, and all things flashy are what full blown Kustom Paintjobs are all about. If you want to flex your painting skills and standout with your paint job you’ll need to learn the process of custom taping, spaying candy, flake, and pearl. We decided to let Eastwood Tech Mike L. paint a skateboard to show you the basic steps to achieving a wild paint job like the pros do.
Upgrading your forced induction system- Installing V-Band Clamps
Evolution is the way of the world in all aspects and your car projects will evolve as you tinker with them or build new projects. Turbo charging or supercharging an engine is fairly simple and can be done inexpensively, but there’s a few places where skimping can cause headaches. Leaking boost flex hoses and clamps are the bane of existence with many DIY turbo setups. A good way to correct this issue is by replacing the silicone or rubber hose connections with V-Band clamps.
TIG Welding FAQ
TIG stands for Tungsten Inert Gas. Unlike MIG or ARC welding, TIG uses an electrode separate from the filler material. This electrode is called the tungsten, and different varieties of them have different welding characteristics. The inert gas is typically Argon, or sometimes Helium or a mixture.
Project of the Week- Powder Coating a vintage Mini Bike
Here at Eastwood we’re always working on new products, but we always make sure we’re testing products we’ve offered for quality. Recently JR decided to powder coat a vintage mini bike to show off some of our Hot Coat Powder and test the outcome of our metallic powders.
Powder Coating Aluminum and other Cast Parts
Larger cast aluminum parts like transmission cases, cylinder heads, engine blocks, etc. can be difficult to get the current to pass through when powder coating a cold part and poor powder adhesion can be the result….
Custom Scratch Built Bed DIY for Project Pile House
Project Pile House has been an ever-evolving project and like many projects, things start small and spiral out of control and next thing you know you’re detailing the inside of your glove box hinges! Luckily I’m not quite that OCD about my vehicles (yet), but Pile House is now more than just a thrown-together junkyard parts runner like I originally planned. It’s turned into a full blown custom and not much on the truck is original or untouched. After getting the cab, dash, hood, etc. all smoothed out and “roughed in”, the original patched together bed and fenders was bothering the crap out of me every time I looked at it. The fenders looked like boat trailer fenders and were more roughed up than a boxer after a title fight, while the bed itself wasn’t much better. I decided to start dreaming up a subtle custom bed.