Item #
13162
BRAND: Eastwood
Economy Buff / Grinder Stand
Work at a more comfortable<br>height, or save workbench space
Work at a more comfortable<br>height, or save workbench space
Work at a more comfortable
height, or save workbench space
height, or save workbench space
Loading...
- 90-Day Returns
- Technical Support
- 90 day Warranty
- In Stock
Description
The right Work Stand, at the right price...designed for your buff motor or grinder
Work at a more comfortable height, or save workbench space, when you mount your buff motor or grinder on this economy work stand.
- 30-1/2" working height
- 11" x 8-3/4" top mounting platform
- Slotted to accept most motors
- Ideal for the weekend resto enthusiast
Specifications
Base and platform are cast iron, connected by a steel post. Stand must be bolted to the floor. Some drilling may be required. 3-legged base is 18" in diameter.
Contents
Pedestal post, Base, and Top platform
Accessories
Application Tips
Instructions
1) Place 3 Pronged Cast Base on floor.
2) Loosen set-screws in base.
3) Insert Pipe into hole in Base and tighten set-screws.
4) Loosen set-screws in the receptacle of the Top Plate.
5) Place Top Plate over Pipe and tighten set-screws.
6) It is done and ready for use!
2) Loosen set-screws in base.
3) Insert Pipe into hole in Base and tighten set-screws.
4) Loosen set-screws in the receptacle of the Top Plate.
5) Place Top Plate over Pipe and tighten set-screws.
6) It is done and ready for use!
Safety Information
Pedestal must be securely bolted to the floor.
Customer Reviews
Questions & Answers
Would this stand work with the 8" bench shear ?
This will not work with the bench shear.
Date published: 2021-04-23
Does the top swivel ?
It will not. The top on this is stationary.
Date published: 2021-04-13
Will this work with a grinder as well?
This stand will work with a grinder.
Date published: 2020-08-05
Can the 8" Elite Bead Roller be used with this?
Since the bead roller is designed to go in a bench vice it would be quite difficult to mount it to this stand.
Date published: 2019-11-04
What size are the holes in the base for the anchor bolts
The holes on this base are about .46".
Date published: 2019-09-06
Just bought the 12” disc sander. Will this stand fit that sander?
This stand is made directly for our buff motor and we can't guarantee compatibility with a sander.
Date published: 2019-07-11
I recently purchased a buffer stand and was wondering what is the purpose of the plastic hook that attaches to the base?
We apologize for the confusion. This is to hold your power cord when not in use.
Date published: 2019-06-06
I bought this stand along with a 1HP buff motor, but I'm having trouble mounting the buffer. When I start tightening the 2 bolts (that came with the stand) the 4 rubber pads on the bottom of the buffer start pressing through slots on the stand.
This is a completely normal occurrence. You just need to tighten down the bolts to put pressure on the rubber feet.
Date published: 2018-01-04
We found other products you might like!
Economy Buff / Grinder Stand
$83.99
In Stock