FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
Increase the capabilities of your bead roller with these radius edge Dies. Create a radius on both straight and curved edges.
The Eastwood Radius Edge Die Set Features:
Fits most bead rollers with a 22mm shaft
Includes 4 Sets to create Radius Edges from 5/16" to 1-1/2"
Dies are machined out of CR12 steel with a 35 HRC hardness
The Eastwood Radius Edge Dies can produce smooth, even, large-radius edges in steel and aluminum. Fits Eastwood #21487, #32044, 28187, and #21327 Bead Rollers and other units with 22mm shafts.
Pinch Hazard. Keep fingers away from moving parts when operating. Wear appropriate work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands and arms. Wear appropriate eye protection. Metal chips can be ejected during the bending process.
Rated 5 out of
5 by
Scott from
Radius die set.These dies seem to be a very high quality, finish on them is outstanding. I am very pleased with the product.
Date published: 2022-03-02
Rated 4 out of
5 by
wayne from
great qualityive ordered a lot of different products and tools from eastwood and its always been good quality stuff and usually get it shipped to me in 2 days, most things i get from them are from shows and swap meets where there set up so i can test things out first and sometimes get a deal! but needed these dies the next weekend so i couldnt wait... so i ordered them online and after waiting over a week i called and told them what was going on a very friendly lady looked into it and told me it had not left there warehouse yet (i get it things happen) fast forward i get the dies and there missing the set screws, so i called back and got interrogated by a lady who was obviously having a bad day and told me she'd she what she can do and hung up on me i called back and asked for tech support so i wouldnt get her again and they are now mailing me the set screws thanks eastwood and yes i looked under the big die i looked under everything.
Will this fit the Eastwood 36 Inch Motorized Bead Roller?
Asked by: ReanimatedCstm
These Dies fits the manual bead rollers with a 22mm shaft, They will not work with the motorized 24 and 36 bead rollers with a 3/4 shaft
Answered by: James Project Advisor
Date published: 2025-04-30
Can these dies be used on a 3mm stainless steel plate?
Asked by: BRI22
These are not recommended to that thick of material.
Answered by: ZachC
Date published: 2022-02-23
will these dies work on mittler brothers electric bead roller
Asked by: tbair64
This will fit on any roller with a 22mm shaft.
Answered by: ZachC
Date published: 2024-11-06
What’s the maximum thickness recommended to use with these dies (mm) for stainless steel.
Asked by: Gunc
That will be up to the bead roller these will be used with. They are CR12 steel with a 35 HRC hardness and should withstand the bead rollers max thickness
Answered by: ZachC
Date published: 2021-10-24
Can I get elbow making dies for all or any of your turning machings?
Asked by: Last Sheetmetal Badger
Unfortunately, we do not offer any alternate dies for these units at this current time. We will be sure to mention the interest to the Product Manager in hopes of having some options in the future.
Answered by: Kelly H
Date published: 2020-02-18
What’s the maximum thickness recommended to use with these dies?
Asked by: Brody
The maximum thickness these dies will work with depends more so on the machine they are being used with- not the dies themselves. For most of the machine we sell we recommend a maximum of 20 gauge stainless steel, 18 gauge mild steel and 16 gauge aluminum
Answered by: Kelly H
Date published: 2021-03-19
Can I order just the 1/2" radius edge dies? or do i have to order the entire set of 4?
Asked by: Mark
This is only sold as a complete se.
Answered by: Kelly H
Date published: 2019-10-08
Are you going to make this to fit the electric bead roller
Asked by: Anonymous
We currently do not have plans to make this for the electric bead roller.