Select from dozens of beautiful, single-stage custom Intermix colors
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
Warranty Included
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
Available in dozens of colors, Eastwood’s Intermix Paint System custom mixed paint choices all feature the most modern automotive refinish technologies paired with premium raw materials in an incredibly user-friendly system that delivers beautiful results in a wide range of colors including classic solids and eye pleasing metallics.
Same quality formulation as Eastwood’s standard paint colors
Choose your own, unique one-of-one color
One kit makes up to 2 complete gallons
Use as a single stage or may be topcoated with clear
Approximate coverage: 125 SQ FT per gallon
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
May be used as a one-step single-stage topcoat, or in combination with Premium European or Premium Urethane Show Clearcoat for even better protection and a deeper gloss. Either way, this advanced urethane color system is the ideal choice to perfectly complete any restoration project, from antique and classics to more modern muscle cars and resto-mods.
How long after this is applied should the vehicle be safe to drive (expose to the elements) and potentially get wet?
Trying to figure out how much time I have to give this after painting.
and how long should I wait before buffing/waxing?
Asked by: Corey
Apply the Eastwood Single Stage Urethane Topcoat in two to three medium wet coats to achieve full coverage.
Allow 5 - 10 min. of flash time between coats.
If attempting to set or even out a metallic pattern, a light final coat may be fogged on
immediately after the previous wet coat has been applied.
If applying pearl or metallic colors, having a base of uniform color will make it easier
to achieve full coverage and a uniform appearance. If not, these colors may require
additional coats for full coverage.
If attempting to set or even out a metallic pattern, a light drop coat may be applied
directly after the final wet coat. It is recommended to increase air pressure and gun
offset from the panel, misting the basecoat onto the wet film in even passes until a
uniform finish is achieved.
You may optionally clearcoat with any of Eastwood’s clear coats after the final coat
has flashed, but before 18 hours have passed.
After 18 hours the surface must be
abraded with 400 - 600 grit before clear coating.
Flash-off Time 5 - 10 min. at 20°C (68°F).
Dry Times 15 - 20 min. at 20°C (68°F).
Can be taped after 8 hours.
Wait 12 hours to polish.
Wait 18 hours to handle.
If recoating after 18 hours, first the surface must be abraded.
