- 2K Aerospray High Temp Aluma Blast
Is this the product I need to paint my aluminum engine pieces (intake, brackets, etc) to give them a fresh aluminum look? I see you also need to clear coat with satin clear, do you need to prime first as well? Or will this stick to clean, bare, aluminum?
2K Aerospray High Temp Aluma Blast
Please follow link. Aluma Blast You will need to top coat this Aluma Blast with our 2K AeroSpray Satin Clear. We apologize for any inconvenience.
Eastwood uses innovative features to allow professional results out of an aerosol.. The unique 2 chamber spray can provides the perfect ratio with no mixing, every time. The advanced nozzle and valve achieve a paint gun like wide fan pattern for better coverage. The nano ceramic formula with silicone alkyds, available nowhere else, creates a tough, long-lasting finish that will look great for years to come. Aluma-Blast copies the look of aluminum perfectly but is much more durable than a raw aluminum surface. These high temp paints are the highest rated in the industry and withstand up to 650°. NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS.
The secrets to what make the 2K Aero-Spray so special:
- Replicates the look of raw aluminum but protects against oxidation and stains
- Highest temperature rating in the industry – 650° F
- Chemical and chip resistant
- Two part formula outlasts and out performs single part coatings. >
- Nozzle & valve engineered for a wide fan pattern like a paint gun for more complete coverage.
- Outer chamber holds ceramic paint, inner chamber holds activator.
- Activator released by “button” on bottom of can.
About 2K Aerospray High Temp Aluma Blast
12 Ounces net weight
Accessories 10041Z PRE Painting Prep. 12196Z Chassis Kleen, 1449Z 2K Epoxy Primer. 16060Z Rust Encapsulator. 51483Z Rust Converter. 12846Z Aerosol Injected Cleaner.11456 Respirator.
Safety Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings.
Warranty Made in Germany using Eastwood's proprietary technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.
Application Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached. After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.
Net Weight 12.1 ounces
10041Z PRE Painting Prep
12196Z Chassis Kleen
51483Z Rust Converter
12846Z Aerosol Injected Cleaner
11456 NIOSH N95 Respirator
Always wear eye, skin and respiratory protection when using this product. Product contains isocyanates, wear NIOSH approved breathing equipment.Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings.
Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 to 72 hours at 68 degreesF.