• Home
  • 4 1/2in Cleaning / Stripping Disc System
4 1/2" Cleaning / Stripping Disc System is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from 4.5" cleaning disc system is a winner I'm stripping all the old BC/CC finish of my 1979 TA. Starting with the hood, I needed something that would work with my Dewalt 7" variable speed polisher/sander. The 4.5" cleaning/stripping disc system was purchased. The rough cleaning disc (gray) cuts very well and the grit was similar to 80 grit sandpaper. The hook and loop system is convenient. I found 1400 rpm to be the best with the cleaning disc. I recommend this product, and plan to use it on other parts of the body where cutting and tool control is critical.
Date published: 2015-04-01
Rated 5 out of 5 by from This system rocks! I had the opportunity to try out the stripping discs at a friend's shop and just HAD to get them for my own. Cutting through tons of paint layers and body filler on my C-20 Longhorn, this set up works famously! And the price knocked off about $10 by getting the kit rather than the parts individually. Thanks for a great buy Eastwood.
Date published: 2013-08-02
Rated 5 out of 5 by from This product works I'm restoring my Pinto and seen the video of the cleaning /stripping system so I bought the kit. The stripper gets to bear metal fast on the painted surfaces and leaves a good surface to work with. The stripper disk does remove old bondo but it wears fast doing so. If you buy the kit get extra stripper disks at that time so you have them when they wear out. Now I know.
Date published: 2015-05-11
Rated 5 out of 5 by from Great Product. This product is great took paint off fast and efficiently. In a matter of 45 minutes stripped two quarter panels the roof and part of the fenders with one disc. i would highly recommend this product.
Date published: 2015-03-23
  • y_2016, m_12, d_5, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_31112, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Will these work to get rust off of a car frame and prep for painting or would you recommend the bristle discs?? Thanks, Chris

Asked by: HVYWT73
Depending on the rust that is on the frame. if it is surface rust yes this kit will work for you. If it is flaking rust I would recommend the bristle disks for that application.
Answered by: Ed O 88
Date published: 2015-03-03
  • 2016-12-05T07:44CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_31112, PRD, sort_recentAnswersFirst
  • clientName_eastwood

4 1/2in Cleaning / Stripping Disc System

Item #31112 Brand: Eastwood

3M™ Scotch-Brite™ discs get down
to bare metal fast to clean and strip

Details

3M™ Scotch-Brite™ Cleaning and Stripping Discs get down to bare metal fast Use your angle grinder with this 7-piece cleaning and stripping disc set from 3M™ to remove rust and paint residue from bare metal without generating excessive heat.
  • 4-1/2"-dia. discs for smaller jobs
  • Cleaning disc produces an 80-grit finish
  • Stripping discs leave a 320-grit finish
  • Hook-and-loop backing

More info...

About 4 1/2in Cleaning / Stripping Disc System

Use the stripping discs on rust and paint to get a less-aggressive, 320-grit finish. The cleaning disc is more aggressive and leaves an 80-grit finish on metal. For all discs, the maximum speed is 10,000 rpm.


Contents

31086 Stripping Discs, 5-pack
31094 Cleaning Disc
31073 Cushioned Backing Pad for a 5/8" x 11 shaft


Accessories

31086 Additional Stripping Discs, 5-pack
31094 Additional Cleaning Disc


Customers also viewed: