• Home
  • 80 Ply 3/4in Thick Buff 8X1/2 in Spiral Sewn
80 Ply 3/4in Thick Buff 8X1/2 in Spiral Sewn is rated 4.5 out of 5 by 13.
Rated 1 out of 5 by from Bad Wheel I would love to give a good review of this wheel but I can't. The one I received has the hole off center so badly that the wheel can't be used due to the out of control vibration. I have one more (I ordered a pair of them) and I hope it is more accurately made.
Date published: 2013-12-18
Rated 3 out of 5 by from buff Reasonable value but poor quality. Arbor holes are not centered in the buff. A lot of the buff is wasted while trimming it to run on a buffer without excessive vibration.
Date published: 2013-03-01
Rated 5 out of 5 by from Polishing supplies This was the best metal buff wheel among the several I ordered. Its width allowed access into hard to reach areas that required the wheel to flex yet remain rigid enough not fold. It appears long lasting as mine shows minimal wear after polishing 22.5 truck wheels. I suggest one buff wheel for each compound grit. I used the four compound kit and found it satisfactory. Wish I had ordered more the first time.
Date published: 2013-07-06
  • y_2017, m_8, d_18, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_13270, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Will a 10" Spiral Sewn thick Buffing Wheel, work with a 1 HP, 3600 RPM motor?

Asked by: Oneeyejacks
Yes, this buff wheel can absolutely be used on the 1hp buff motor..
Answered by: KHoffnagle
Date published: 2016-03-24

Is this buffing wheel chucked into a drill? Is the 4 inch wheel the same part as found in the Buffing Kit Part # 50341?

Asked by: JamesPal
Technically yes it can be used in a drill/dremel tool. But no it is not the same as the one in the kit
Answered by: SeanA
Date published: 2014-12-18

what is the diameter?

Asked by: derf
We carry them in a 4", 6" 8" or 10" diameter all with a 1/2" width
Answered by: SeanA
Date published: 2014-11-25

What is the arbor size and the thickness of the 8" Dia. wheel ? I require a 3/4" center hole.

Asked by: prince jack
That one in particular is a 1/2in arbor. You would need to jump to a 10inch wheel 13038 to accommodate a 3/4in arbor.
Answered by: SeanA
Date published: 2014-10-17

what is the arbor hole size 1/2 ?

Asked by: cliffb
Yes the arbor hole is 1/2 inch
Answered by: SeanA
Date published: 2014-11-12
  • y_2017, m_8, d_18, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_13270, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

80 Ply 3/4in Thick Buff 8X1/2 in Spiral Sewn

Item #13270 Brand: Eastwood

Long-wearing, 3/4"-face, cotton
wheel for coarse buffing, cutting

In stock

Only $13.99

Details

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected cotton material with concentric stitching. Face is 3/4" wide 80 ply construction. Use with Tripoli (13135) or Stainless (13136) Compound.

More info...

About 80 Ply 3/4in Thick Buff 8X1/2 in Spiral Sewn

Dependable, well-balanced, long-wearing wheel for coarse buffing and cutting on all materials. Made from selected cotton material with concentric stitching. Face is 3/4" wide 80 ply, 1/2" arbor hole construction. Use with Tripoli (13135) or Stainless (13136) Compound.


Instructions

Click here for Buffing Instructions


Customer Reviews

Questions & Answers

Customers also viewed: