• Home
  • Eastwood Rodz Berry Metallic wo/Activator

Eastwood Rodz Berry Metallic wo/Activator

Item #50226ZP

Premium acrylic urethane topcoat
for exceptional long-lasting beauty
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.


Eastwood Rodz Berry Metallic 3:1 SS Urethane

More info...

About Eastwood Rodz Berry Metallic wo/Activator

EW Rodz Berry Metallic 3:1 SS Urethane

Tech Sheet


21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 50040ZP THRU 50042ZP PAINT PREP KITS 12454Z Block sanding kit, 20491 3-gun set 20472 Air managemnet system

MSDS Sheet

Click Here for Material Safety Data Sheet


Always wear appropriate eye, skin and breathing protection.


Made in USA


Clean surfaces of all contaminents. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours