Item #
16114 Eastwood's Self Etch Primer Black
BRAND: Eastwood
Eastwood Self-Etch Primer Black for Automotive Car Paint
Etches and primes bare, rust-free metal in one step
Etches and primes bare, rust-free metal in one step
Eastwood Rust Encapsulator Aerosol Gray 15oz is rated
out of
5 by
13.
Etches and primes bare, rust-free metal in one step
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
True acid-etching formula sticks to virtually any clean, bare, rust-free metal to improve adhesion and durability of most non-epoxy top coats.
- Lacquer-based, single-stage formula requires no catalyst
- Enhances Adhesion and Durability of Most Non-Epoxy Top Coats
- Adheres to Steel, Stainless, Aluminum and chrome
- Great base for high-build primers
- Withstands up to 170 degrees F
- Available in Easy to Use Aerosol Cans or Economical quarts and gallons
- Made in the USA
This easy to use primer etches and primes bare, rust-free metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatable with virtually any paint or auto finish. The aerosol self-etching formula bonds better to bare metals than other aerosol primers. It is also a single-stage formula which requires no catalyst, making it even easier to use. Self Etch Primer is also available in Gray.
If you're sanding primer or body filler you have to check out the Eastwood Elite Contour DSB Dustless Sanding Block System that gives you laser straight panels while keeping you and your shop clean because it eliminates 95% of the sanding dust.
In the Box
Guides & Accessories
Reviews
Rated 5 out of
5
by
Kent NC from
Paint
Great product! Very impressed with the application and the finish. Kent in NC
Date published: 2023-01-02
Rated 5 out of
5
by
Brian D from
Holy Snikes!
Wow is this stuff great! Coverage is superb and high quality
Date published: 2022-09-27
Rated 5 out of
5
by
Mike M from
Epoxy Primer over Etching Primer?
The etching primer is an excellent product. The only draw back is that you can not apply epoxy primer over the etching primer.
Date published: 2021-08-07
Rated 4 out of
5
by
CJR_ from
Great primer, hard to sand
Excellent, tough primer but doesn't wet sand too easily
Date published: 2021-10-18
Rated 3 out of
5
by
Brent from
Flaked off after 1 week
I used this product to prep a new chrome exhaust tip for high heat paint also purchased from Eastwood. I followed the instructions explicitly and discovered yesterday that after a week the paint and primer has flaked off in a large section. Very disappointing.
Date published: 2023-11-22
Rated 3 out of
5
by
Paul from
Good not great
Work in 90% of my bumper. It did peel off in a few spots. I did prep the bumper with sandpaper and cleaned with alcohols wipes.
Date published: 2023-05-01
Questions & Answers
Hello, can this be applied over rust encapsulator platinum and under extreme chassis black gloss?
I usually do not use Etch primer on a newly clean surface. I then use Encapsulator, then epoxy primer then topcoat
Date published: 2023-11-27
what are the cure times for this primer? How long should it flash cure before spraying a second coat of the primer? i will put 2k ceramic chassis black over top, how long should the second coat of primer cure before spraying the chassis black?
Allow the final coat of Self Etching Primer to dry for a minimum of 3-4 hours before dry sanding, or 15 minutes before wet sanding with #400 grit sandpaper. Do not use near open flame. Dry and recoat times are based on 70°F (21°C) and 50% relative humidity. Allow more time at cooler temperatures.
Date published: 2023-02-10
do you sell quart size black self etching primer
We do not offer our Self Etch primer in a quart. However, we do offer the SEM Self Etch primer in black in a quart option and this can be found here: https://www.eastwood.com/sem-self-etching-primer-black-quart-can-39674.html
Date published: 2022-10-06
Will the black be hard to cover with gray primer?
It will not. Our Black paint is perfectly fine to be applied over gray primer as you normally would.
Date published: 2022-09-23
Can this self etch primer be applied over body filler?
It can not. Self Etch primer must be applied first then filler if needed.
Date published: 2022-08-19
What size nozzle should be used and at what pressure?
A 1.4-1.5mm nozzle would work well and we recommend regulating your air pressure at a regulator attached to the bottom of your paint gun between 25-30psi.
Date published: 2023-01-12
Can I use this after using Fast-Etch?
As long as the surface has been thoroughly cleaned with our PRE or acetone.
Date published: 2022-04-19
Can this etching primer be sprayed over prepped paint and milled aluminum wheels? I want to paint my black and milled wheels all black with your 2k satin black wheel paint.
Self-Etching primer should be applied on bare metal only and should not go over existing paint.
Date published: 2022-03-02
We found other products you might like!
Eastwood Self-Etch Primer Black for Automotive Car Paint
Starting at$19.99
In Stock