• Home
  • SEM Tintable Truck Bed Liner Kit

SEM Tintable Truck Bed Liner Kit

Item #10258ZP Brand: SEM

Durable textured bedliner can be tinted to match your truck's color

Details

Professional Grade TINTABLE Bedliner - This durable urethane textured bedliner can be tinted with enamel, urethane or base coat to match the vehicle's color. Simply mix color of choice with gallon of bedliner to achieve desired shade, catalyze and spray with any undercoating gun. Dries in 8 hours, ready for use in 48 hours. Includes enough materials to coat most 8 foot truck beds: 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label.

Great for:

•Fender Wells
•Floor Pans
•Rocker Panels
•Truck Beds

About SEM Tintable Truck Bed Liner Kit

Professional Grade TINTABLE Bedliner - This durable urethane textured bedliner can be tinted with enamel, urethane or base coat to match the vehicle's color. Simply mix color of choice with gallon of bedliner to achieve desired shade, catalyze and spray with any undercoating gun. Drys in 8 hours, ready for use in 48 hours. Includes enough materials to coat most 8 foot truck beds: 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label.


Contents

Includes enough materials to coat most 8 foot truck beds: 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label.


FAQ’s

For best results coat the front and sides first followed by the floor and finish with the tailgate. Remove all masking tape while the final coating is still wet. Allow to dry 8 hours prior to delivery and 48 hours before use of truckbed.


Warranty

Made in the USA. Shelf-Life 1 Year.


Application

For best results mix entire gallon with paint of your choice to tint but DON'T CATALYZE. Only catalyze one quart at a time. Pot life is 20 minutes at 70 degrees F. High heat and humidity will substantially reduce pot life. This product is applied best with an undercoating gun at 45-90 psi. Apply 2 coats, allowing 10-20 minutes flash time between coats. Allow 45 minutes flash time for a third coat if desired. Optimum film thickness is 15-20 mils. Can not be tinted with lacquer or water based paints.