• Home
  • Triple Head 180 degree Tubing Bender 3/16-3/8 in
Triple Head 180 degree Tubing Bender 3/16-3/8 in is rated 4.1 out of 5 by 15.
Rated 3 out of 5 by from too sloppy clamp for small tube I bought this bender specifically to bend 3/16 dia. tube as advertised. I have a bender for the 1/4"-3/8" tube already. When it arrived I saw that it had only 3 tracks.You are expected to bend the 3/16 tube in the 1/4" track. I found that when you started bending, because of the oversize slot, once you passed 90 degrees the tube would slip and then it would kink.I have bent may tubes before and you need a bender that holds the tube secure while bending. I am sorry to say, this one does not. I sent it back. It should not be advertised as a 4 tube size bender. It simply does not bend the small tube . It is a shame because I bought many tools from Eastwwod and this is the first one that disapointed me
Date published: 2014-03-18
Rated 2 out of 5 by from Cannot do the job Bought this to bend 3/16 alu tube to 180 degree. The bend never got pass 90 degrees. I tried a bigger size and the same problem happened. The groove on the bender is over size, so it does not prevent wrinkles on the under side of he tube. And since the handle of the bender does not fit the tube nicely, the tube will collapse easily. Furthermore, the actual product is different from the picture on the website
Date published: 2012-04-17
Rated 4 out of 5 by from Too bulky and awkward This is definitely only for workbench bending. Can not fit into small or tight places. Could never get it to bend to 180 degrees without kinking the line. I can hand bend much quicker.
Date published: 2013-05-08
Rated 2 out of 5 by from Not impressed with quality This tool does not have a specific channel for 3/16 tubing, need to use 1/4, so it is a little sloppy, the degrees are very hard to read because of poor stamping.
Date published: 2014-06-05
Rated 1 out of 5 by from purchased for 3/16 and 1/4 inch I purchases this bender to bend my nitrous lines. It bends the 1/4 inch but, will not bend the 3/16 as stated in the description. It is made to bend the 3/16 tubing in the 1/4 inch slot. This does not work because it does not support the tube when bending and allows the tube to kink.
Date published: 2015-05-23
Rated 5 out of 5 by from Outstanding Tool Used this tool, with other brake bending tools, and by FAR this is superior to other leverage tools in bending brake tubing. Take your time, and you will get tight, quality bends with no kinks! Outstanding.
Date published: 2012-04-13
Rated 5 out of 5 by from Eastwood Triple 180 I purchased your Eastwood Triple head tubing bender awhile ago, but wanted to use it a few times before giving it a review. The product is as described & works even better. I am very pleased and would recommend others to purchase one.
Date published: 2015-07-08
Rated 5 out of 5 by from Well built tool, works excellent Just received this tubing bender, it is very sturdy and works like a charm. Easy to make 45°, 90° 180° bends. I also like that the gauge lets you know where the bend will begin. Highly recommend this tool.
Date published: 2012-08-17
  • y_2017, m_2, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_12435, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

I am trying to bend 5/16 stainless steel transmission lines i have tryed benders from Harbor Fright and the tool just bends not the tubeing  (exageration). Will these  benders hold up to this project?

Asked by: David Thom
These have been tested to hold up with stainless. Confidently I will say yes, you will have no issues.
Answered by: SeanA
Date published: 2014-12-18
  • y_2017, m_2, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_12435, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Triple Head 180 degree Tubing Bender 3/16-3/8 in

Item #12435 Brand: Eastwood

Bends 3/16", 1/4", 5/16" or 3/8"
tubing in steel, aluminum or copper


Versatile Tubing Bender forms lines easily, accurately It's the must-have tool for making your own brake, air conditioning, fuel and transmission lines.
  • Bends 3/16", 1/4", 5/16" or 3/8" tubing
  • Steel, aluminum or copper
  • Smooth, tight, 180-degree bends

More info...

About Triple Head 180 degree Tubing Bender 3/16-3/8 in

Use this versatile tubing bender to make accurate and "kink-free" radii and bends in 3/16", 1/4", 5/16" and 3/8" tubing—up to 180 degrees. Takes minimal effort, and gives you improved control. Complete with cushioned grips for comfort and stability. Lightweight die-cast aluminum. About 11" long.


Always wear eye protection when making up rigid lines.

Customer Reviews

Questions & Answers

Customers also viewed: