• Home
  • Eastwood 2:1 Urethane Clear Gallon and Activators

Eastwood 2:1 Urethane Clear Gallon and Activators

Item #51144ZP Urethane Clear

Delivers the shine and miles-deep appearance of a show-quality finish
  1. Eastwood Urethane Clear 2:1 Gallon
    Item #50250ZP
    Only $74.99

    In stock

  2. Eastwood Urethane Clear 2:1 Activator Quart 2 TO 1
    Item #50252ZP
    Only $29.99

    In stock

$0.00

Details

Eastwood European Urethane Clearcoat plus Activator System makes 1-1/2 gallons of premium clearcoat

  • Easy to spray flat, and even easier to polish
  • Long-lasting protection from UV, chemicals and weathering
  • High-solids content to build quickly and avoid shrink-back as it cures

Eastwood Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI. Flows and levels easily with no shrinkage or dieback. Features excellent durability and long-lasting UV protection, weathering and everyday wear. Includes 2 quarts Eastwood Low VOC Activator. Mixes 2:1, 2 parts clear, 1 part activator.


More info...

About Eastwood 2:1 Urethane Clear Gallon and Activators


MIXING RATIO
Thoroughly mix two parts 50250ZP HS Clear in gallons or 50251ZP HS Clear in quarts, with one part 50252ZP HS Clear Activator. For even better spray-ability, 2:1 mix may be reduced with a urethane-grade reducer or other appropriate solvent product. Doing this will improve the flow and leveling. Eastwood suggests using a Zero-VOC reducer to avoid potential compliance issues.

Use caution in mixing materials as HS Clear may begin to gel after approximately two hours (at 70 °F).

SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psi

APPLICATION INSTRUCTIONS
Apply Eastwood HS Clear in two medium wet coats, with a 10-minute flash period be- tween each. Clear should be dry to the touch within 10 minutes, and will be tack-free within three hours (at 70 °F). Do not recoat between one and eight hours after previous coat. Additional coats may be applied after eight, but before 18 hours (at 70 °F) have passed from completion of previous coat. Ideal application temperature is between 70°F and 90°F.

For increased depth and gloss, well cured clear may be wet sanded and recoated with one to two additional wet coats.


Contents

(1) Gallon 50250ZP Eastwood Urethane Clear
(2) Quarts 50252ZP Eastwood Urethane Clear 2:1 Activator
Makes 1.5 gallons of clear


Accessories

paint guns, tape, masking paper, wet sanding products, paint suits, respirators, mixing cups


Instructions

Click Here for Urethane Clear Tech Sheet


Safety

Always wear eye, skin and respiratory protection when painting follow instructions on can label


Warranty

Made in USA


Product Video


Customer Reviews

Questions & Answers