• Home
  • Eastwood Air Flange Punch Tool
Eastwood Air Flange Punch Tool is rated 3.4 out of 5 by 16.
Rated 5 out of 5 by from Great Tool! Love it! Just used the 3/16"/Flanger tool today and it worked great! Didn't need to punch holes with it, but have no reason to think it will be of any less quality than the flanger. Been debating for years whether to stick with my cheap "plier type" flanger and decided to pop for this. Sorry I didn't buy it sooner!! I only wish this flanger put a bit wider flange on the sheet metal. (It's less than a 1/2" wide.) I like more overlap than this gives, but can live with it. It's a bit heavy, but a tool with jaws like this baby has, and needs, isn't going to be a lightweight. Great investment for the money! I highly recommend this.
Date published: 2016-01-21
Rated 1 out of 5 by from Horrible Product I purchased the air flange punch tool two weeks ago and it failed the first time I used it. I punched three holes and attempted to flange the same material, when it leaked oil out of the top. I pulled it apart and found that the top assemble had broken around an o-ring. I would not recommend this tool to anyone. Will not be buying from Eastwood again. Called to voice my concerns, had to leave a message and never got a return call.
Date published: 2014-11-18
Rated 4 out of 5 by from It worked I bought one from harbor freight and it didnt work! I bought this one paid $10 more and it did what i needed it to do! Remember to store it air inlet upwards and oil it when you store it.
Date published: 2014-10-27
  • y_2017, m_8, d_18, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_30121, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Will this flange be offset enough for 16ga sheet metal to align evenly or will there be a small step?

Asked by: Smokeatr23
There may be a small step left after flanging.
Answered by: S Church
Date published: 2017-01-30

How deep is the flange offset?

Asked by: Jayr
the offset is 3/8" deep.
Answered by: S Church
Date published: 2017-07-31
  • y_2017, m_8, d_18, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_30121, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Air Flange Punch Tool

Item #30121 Brand: Eastwood

Eastwood Air Flange Punch Tool

In stock

Only $59.99



It's a Flanger, and a 3/16 Punch, all in one handy pneumatic tool...and it's Eastwood priced for the DIYer!

  • Punches 3/16” holes
  • 7/8" Flange width
  • Air Consumption 4 CFM; Max Air Pressure 90 PSI
  • Works on up to 16 Gauge Mild Steel or 18 Gauge Stainless Steel

This 2 in 1 pneumatic tool easily punches holes and flanges edges in sheet metal for creating and installing patch panels, replacement panels, or custom sheet metal work. The double action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.

More info...


(1) Eastwood Air Flange Punch Tool


• Max Capacity: 16 Gauge Mild Steel / 18 Gauge Stainless Steel
• Air Consumption: 4 CFM @ 90 PSI
• Air Pressure: 90 PSI
• Throat Depth: 5/8”
• Flange Width: 7/8”
• Punch Size: 0.19”
• Punch Position: 0.287” (Center to Edge)
• Weight: 3 Lbs.


Click here for product instructions


Always wear appropriate eye and ear protection. Keep fingers away from moving parts.

Click here to see safety products


1 Year Warranty

Customer Reviews

Questions & Answers

Customers also viewed: