• Home
  • Eastwood Satin Extreme Chassis Restoration Kit w/RE

Can I brush over rust with rust ensulator? Or do I have to remove rust from my truck frame? Painting dodge 2500 frame.

Asked by: CD logger
The rust should first be hit with a minimum of a wire brush to knock of the worst of the scale.
Answered by: S Church
Date published: 2015-06-03

Can this product be brushed on?

Asked by: Chrisv
It can, but the product is thick and will not flow out properly. It would leave brush streaks.
Answered by: SeanA
Date published: 2015-03-20

What needle size would you suggest for RE?

Asked by: Yannick
1.4 tip with a paint gun
Answered by: SeanA
Date published: 2015-01-26

can this product be thinned using reducer or acetone without affecting its performance?

Asked by: btruckin
The products can be reduced 5-10% with lacquer thinner if needed. The cure times will be the only thing to vary
Answered by: SeanA
Date published: 2014-10-23

can use a conventional spray gun.

Asked by: John Dee
A conventional spray gun or HVLP gun will work to apply these products, assuming you have the correct sized needle/nozzle.
Answered by: NickC
Date published: 2014-10-18
  • 2016-05-27T09:05CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_11962ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Satin Extreme Chassis Restoration Kit w/RE

Item #11962ZP Brand: Eastwood

Stop and seal rust with RE; topcoat with tough Extreme Chassis Black


2-Step Restoration Kit: first encapsulate, then coat, the rust It's all in this kit. Step 1: seal and stop corrosion from spreading with Eastwood Rust Encapsulator. Step 2: coat it with Extreme Chassis Black Satin, with 3 times the resins of traditional coatings.
  • 1-qt. can of Rust Encapsulator penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
  • Two 1-qt. cans of Extreme Chassis Black Satin offer improved resistance to brake fluid, fuel, solvent, chips and scratches

More info...

About Eastwood Satin Extreme Chassis Restoration Kit w/RE

Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats. 1-qt. can covers about 50 sq. ft.

3 times more resins make our Extreme Chassis Black Satin 3 times more durable than our original Chassis Black formula. Can be re-coated at any time without lifting. 1-qt. can covers about 40 sq. ft. (you get two cans).


16065 Black Rust Encapsulator, Quart (1 can)
11176Z Extreme Chassis Black Satin, Quart (2 cans)

Customers also viewed: